108 Manufacturing jobs in Enfield Lock

Reporting to the Value Stream Supervisor, this role is responsible for providing engineering support and expertise to Value Stream to optimise process capability, efficiency, and output. This includes the development, implementation, and continual improvement of manufacturing tools, processes, and systems in alignment with IATF 16949 standards. This role ensures that all activities are executed within agreed timelines while maintaining compliance with quality management requirements and driving best practices in process engineering.

Responsibilities include:

• Lead and sustain continuous improvement initiatives across all manufacturing activities within the Value Stream, utilising Kaizen events, SMED, Six Sigma, and Value Stream Mapping.
• Drive implementation of Lean practices to eliminate waste, improve efficiency, and optimize flow throughout the workplace.
• Develop, validate, and optimize manufacturing processes to ensure compliance with IATF 16949 requirements, focusing on robust process controls and defect prevention.
• Support DFMEA and Process Failure Mode and Effects Analysis (PFMEA) for new products.
• Ensure all process and assembly equipment meets safety, quality, and capability standards, preventing hazards and ensuring ergonomic compliance.
• Specify, procure, and validate manufacturing equipment, tooling, and fixtures to meet production and quality requirements.
• Support adherence to IATF 16949 standards by ensuring robust process documentation, risk assessments, and control plans.
• Collaborate with Quality teams to maintain product conformity and drive corrective actions using structured problem-solving methodologies (DMAIC, 8D).
• Develop and improve Health & Safety practices for all processes, ensuring compliance with site policies and legal requirements.
• Lead cost reduction initiatives through process optimisation, value engineering, and capital expenditure recommendations.
• Provide accurate product costings and feasibility analyses to support business objectives.
• Work with cross-functional teams to support New Product Development by ensuring manufacturing processes are integrated from concept to launch.
• Prepare and submit reports detailing capital expenditure requirements, including justification and cost analysis.
• Establish and maintain process capability studies and monitor performance against control limits.
• Lead root cause analysis for process-related issues and implement permanent corrective actions.

The successful candidate will have at least 5 years’ relevant experience in a high-volume manufacturing environment supported by strong hands-on engineering skills and a passion for continuous improvement. They will possess excellent time management and prioritization skills in conjunction with excellent communication and influencing skills developed through the delivery of cross functional projects and the engagement of stakeholders. Applicants will be able to demonstrate initiative, drive and a strong desire to achieve results through the use of Lean tools and processes.

ABOUT US

Crane Building Services and Utilities (BS&U) is part of the Fluid Handling Division of Crane Co. founded in 1855, which is a global, multi-industry, New York Stock Exchange quoted company. We design, manufacture, package and market engineered flow control solutions for the HVAC and Utility sectors, with strong sales into key growth export markets.

The name Crane speaks of who we are, what we stand for and how our customers perceive us: A company with history and tradition, but also a company that is innovative, quality minded and one which acts with integrity and still holds to the resolution of its founder.

Crane Co. was founded on 4th July 1855 by Richard Teller Crane who made the following resolution:

"I am resolved to conduct my business in the strictest honesty and fairness; to avoid all deception and trickery; to deal fairly with both customers and competitors; to be liberal and just towards employees; and to put my whole mind upon the business."

The essence of this resolution is the business policy of Crane Co. today.

We believe that embracing inclusion and diversity is key to our success and as such we are seeking applications from candidates who will contribute their different backgrounds, cultures and experiences to our business.

Overview

The Manufacturing Engineer will play a key role in supporting day-to-day production operations, including machine programming, process validation, and technical support to the manufacturing team. This position will focus on driving process improvements, enhancing manufacturing efficiency, and maintaining high standards of product quality through continuous improvement initiatives.

Key Responsibilities

• Assess new and existing technologies to develop and optimise manufacturing plans.

• Maintain equipment functionality by performing basic maintenance and coordinating external servicing for major repairs.

• Oversee maintenance records and troubleshoot production issues to minimise downtime.

• Establish, implement, and sustain manufacturing processes for new products across their full life cycle.

• Evaluate equipment and production methods with the goal of improving performance, efficiency, and reliability.

• Create and validate automated machine programs.

• Develop detailed process documentation and train production staff on updated procedures.

• Provide advanced technical support to production teams to resolve complex issues.

• Collaborate with Quality teams to analyse performance data, identify trends, and recommend corrective actions.

• Use structured problem-solving techniques (e.g. root cause analysis) to address assembly and process issues.

• Create and manage all manufacturing documentation in accordance with internal standards.

• Perform additional related duties as required to support manufacturing operations.

The Candidate

Degree-qualified in Mechanical, Manufacturing, or a related Engineering discipline (BEng preferred).

Strong understanding of Design for Manufacture (DFM) principles.

Knowledge of lean manufacturing and continuous improvement techniques.

Ability to read and interpret technical drawings, electrical schematics, and assembly documentation.

Experience using ERP/MRP systems in a production environment.

Capable of working under pressure and meeting tight deadlines.

Excellent communication skills, with the ability to collaborate across teams and departments.

Strong organisational skills with the ability to prioritise multiple projects effectively.

Familiarity with project management methodologies is advantageous.

The Package

Salary: From £40,000 per annum, depending on experience.

Join a leading partner of the UK's Ministry of Defence! Our client is looking for a dedicated and experience manufacturing controller with a strong background and stores management. In this role, you'll be responsible for loading, controlling, and monitoring work packages within a state-of-the-art manufacturing facility and Bolton. Ideal candidates will have proven experience and stores environmen.

ZIPC1_UKTJ

Manufacturing Engineer – West London - £43,000 + Bonus + Ex. Benefits – Permanent

Are you a hands-on problem solver who turns engineering challenges into practical solutions?

Join our innovative manufacturing team as a Manufacturing Engineer and lead process improvements that make production smarter, faster, and safer. Make a real impact every day.

What’s in it for you

Training & Development – Access to advanced technical training and career growth opportunities.

Competitive Pay & Bonuses – Strong salary with performance-based bonuses and allowances.

Perks & Discounts – Flight discounts, retail deals, subsidised canteen, and wellness perks.

Work-Life Balance – Flexible hours and support for personal commitments.

Career Credibility – Experience with a leading aerospace/MRO company enhances your CV and future opportunities.

What You’ll Be Doing

• Develop and improve manufacturing documentation, tooling instructions, and inspection processes to keep production running smoothly.
• Lead cross-functional projects that boost efficiency, quality, and reliability on the shop floor.
• Use data, analysis, and lean techniques to uncover opportunities for continuous improvement.
• Explore new methods, automation technologies, and smarter layouts to enhance performance.
• Support maintenance and tooling teams to ensure equipment is ready and reliable.
• Investigate production issues, identify root causes, and implement sustainable fixes.
• Measure and report performance metrics, helping turn insights into tangible results.

What You’ll Bring

• HND (or higher) in a mechanical or manufacturing discipline, plus strong CAD skills (SolidWorks experience a bonus).
• Manufacturing engineering experience, ideally in aerospace or precision engineering.
• A proven track record of delivering improvement projects that make a measurable difference.
• Strong understanding of Lean tools such as DMAIC, 5 Whys, and 8D.
• Confident communicator who enjoys working with people across all levels and departments.
• Skilled in ERP/MRP systems, data analysis, and technical documentation.
• Analytical, curious, and driven by results – someone who takes ownership and follows through.

What to do now:

If this sounds like the right role for you, we’d love to hear from you. Please apply via LinkedIn.

Lead Manufacturing Engineer

NW London

Are you a hands-on Manufacturing Engineer with a passion for process improvement, NPI, and driving innovation in electronics or device assembly, ready to take full ownership of a busy manufacturing area and shape its future. This isn’t just a technical role — you’ll have the authority to drive strategy, optimise processes, and influence senior leaders to deliver tangible business impact.

Join a growing business that blends cutting-edge product development with high-mix, low-to-medium volume manufacturing. You'll work alongside cross-functional teams to optimise processes, support new product launches, and lead continuous improvement initiatives that truly make an impact.

You won’t be stuck firefighting here. This is a real opportunity to shape how things are made — from new product launches to smart process improvements in a high-mix, low-to-medium volume manufacturing environment.

The role in 60 seconds:

You’ll own the manufacturing area end-to-end, from process design to execution and improvement, leading NPI projects, turning prototypes into optimised production processes. Implement APQP, PFMEA, control plans and capability studies to ensure product quality. Drive Lean and Six Sigma initiatives that improve efficiency, yield, and cost-effectiveness. Influence board-level decisions with clear strategy and data-backed recommendations Solve complex production challenges and see your ideas implemented on the shop floor. You’ll work with passionate teams across R&D, Quality, Production and Supply Chain.

Why this might just be your next big move:

• You’ll be more than a cog in the wheel — your voice matters here
• You’ll play a key role in bringing new tech from prototype to production
• You’ll leave things better than you found them — and be recognised for it
• You’ll collaborate with sharp, cross-functional teams in a growing, tech-led business
• You’ll be hands-on — not desk-bound

Implement APQP, PFMEA, control plans, , and capability studies to ensure product quality

Drive Lean and Six Sigma initiatives that improve efficiency, yield, and cost-effectiveness

Influence board-level decisions with clear strategy and data-backed recommendations

Solve complex production challenges and see your ideas implemented on the shop floor

What we’re looking for:

• 10–12 years’ experience in electronics or device assembly manufacturing
• Proven track record in NPI, APQP, and continuous improvement
• Expertise in Lean Manufacturing, Six Sigma (Green Belt or higher preferred)
• CAD proficiency (SolidWorks, AutoCAD) and ERP/MES systems experience
• Ability to influence senior stakeholders and lead change without direct line management

Bonus points for:

• Lean Six Sigma certification (Green Belt or above)
• Familiarity with ISO 9001, 13485, or IATF 16949
• ERP/MES or manufacturing analytics experience

If this role sounds like you drop me a message or apply now to learn more.

About us:

Stevenage sheet metal manufactures high quality engineered parts to a variety of industries from pharmaceutical through to automotive. SSM has 45 years of experience within manufacturing and specialises in sheet metal laser cutting, forming and fabrication.

About the role:

The Manufacturing General labourer is responsible for performing a variety of activities around the manufacturing facility, from production support through to general housekeeping. The general labourer should be able to work independently, but also work well in a team environment, following instructions from supervisors and other personnel. The general labourer should be able to work in a safe and efficient manner.

Responsibilities:

· Deburring

· Carry out chemical cleaning of welded components

· Assist manufacturing activities as required

· Support with transporting goods around the manufacturing facility

· Perform other duties assigned by supervision

Candidate requirements:

· Able to follow instructions

· Quality driven

· Self-sufficient

· Good oral and written communication skills

· Team player, hardworking and reliable

· Able to operate various hand and power tools

Job Type: Full-time

Pay: £11.50-£12.15 per hour

Expected hours: 40 per week

Work Location: In person

Manufacturing Process Engineer (NPI Projects)

London (Greenwich) | Up to circa £42 to 47.50 per hour (Umbrella) | Long-Term Contract

About the Role

We’re looking for a Manufacturing Process Engineer to help shape the future of assembly processes. In this role, you’ll design and implement lean improvements that make production safer, more efficient, and more sustainable. You’ll work closely with R&D, support projects from concept through to delivery, and ensure processes meet the highest standards of quality and compliance.

What’s in it for you?

• Competitive pay and a secure long-term contract
• A collaborative and supportive team culture
• The chance to make a real impact on products that support critical global infrastructure
• Work with cutting-edge technologies that are making a difference worldwide

What you’ll be doing

• Design & Improve: Create lean process improvements for tools, equipment, and assembly methods
• Deliver Change: Manage projects from concept to handover, keeping efficiency and timelines on track
• Validate & Test: Ensure new tooling and processes are reliable and compliant before production
• Keep it Safe: Lead PUWER assessments, risk analysis, and safety compliance
• Collaborate: Partner with R&D, training schools, and wider teams to support innovation and development
• Measure & Monitor: Define KPIs, track progress, and ensure budgets and quality targets are met

What we’re looking for

• A degree in Mechanical, Industrial, Production, or related Engineering field
• Hands-on experience in manufacturing or technical environments
• Knowledge of ISO9001/TL9000, Lean, Six Sigma, and regulated industries
• A methodical problem-solver with excellent organisational skills
• Willingness to learn systems such as SAP and sDMS

How to apply

If this sounds like the right role for you, we’d love to hear from you. Please apply via LinkedIn.

• Developing and implementing strategies to optimize manufacturing processes, workflows, and layouts.
• Designing, evaluating, and commissioning new manufacturing equipment and technologies, including automation solutions.
• Leading lean manufacturing initiatives, Six Sigma projects, and continuous improvement programs.
• Troubleshooting production issues, identifying root causes, and implementing corrective actions.
• Developing and maintaining Standard Operating Procedures (SOPs) and work instructions.
• Collaborating with design and engineering teams to ensure manufacturability of new products.
• Monitoring key performance indicators (KPIs) for production efficiency, quality, and cost.
• Managing external suppliers and contractors involved in manufacturing processes.
• Ensuring compliance with all health, safety, and environmental regulations.
• Mentoring junior manufacturing engineers and providing technical guidance.

• Bachelor's or Master's degree in Manufacturing Engineering, Mechanical Engineering, Industrial Engineering, or a related field.
• Significant experience (5+ years) in a manufacturing engineering role, with a focus on process improvement and optimisation.
• Proficiency in lean manufacturing methodologies (e.g., Kaizen, 5S, Value Stream Mapping) and Six Sigma.
• Experience with CAD/CAM software and simulation tools.
• Strong understanding of automation, robotics, and Industry 4.0 principles.
• Excellent analytical, problem-solving, and project management skills.
• Proven ability to lead cross-functional teams and drive change.
• Exceptional communication and interpersonal skills.
• Experience in a regulated industry (e.g., aerospace, automotive, medical devices) is highly desirable.
• Must be able to work full-time at our facility in London, England, UK .

• Analyze current manufacturing processes to identify inefficiencies, bottlenecks, and areas for improvement.
• Design, develop, and implement new manufacturing processes and technologies.
• Optimize existing processes to increase productivity, reduce waste, and lower costs.
• Develop and maintain Standard Operating Procedures (SOPs) for manufacturing processes.
• Conduct root cause analysis for production issues and implement corrective actions.
• Collaborate with production teams, quality control, and R&D to ensure seamless integration of processes.
• Design and implement process control strategies to ensure consistent product quality.
• Manage process improvement projects from conception to completion.
• Ensure all processes comply with health, safety, and environmental regulations.
• Train production staff on new processes and equipment.
• Evaluate and recommend new equipment and technologies to enhance manufacturing capabilities.

• Bachelor's degree in Mechanical Engineering, Manufacturing Engineering, or a related field.
• Minimum of 5 years of experience in process engineering within a manufacturing environment.
• Proven experience in process optimization, lean manufacturing, and Six Sigma methodologies.
• Strong understanding of manufacturing equipment, automation, and control systems.
• Excellent analytical, problem-solving, and project management skills.
• Proficiency in CAD software and process simulation tools.
• Strong communication and interpersonal skills, with the ability to work effectively with cross-functional teams.
• Familiarity with quality management systems (e.g., ISO 9001).
• Ability to work effectively on-site and contribute to a dynamic production environment.