What Jobs are available for Manufacturing in Hatfield?

Reporting to the Value Stream Supervisor, this role is responsible for providing engineering support and expertise to Value Stream to optimise process capability, efficiency, and output. This includes the development, implementation, and continual improvement of manufacturing tools, processes, and systems in alignment with IATF 16949 standards. This role ensures that all activities are executed within agreed timelines while maintaining compliance with quality management requirements and driving best practices in process engineering.

Responsibilities include:

• Lead and sustain continuous improvement initiatives across all manufacturing activities within the Value Stream, utilising Kaizen events, SMED, Six Sigma, and Value Stream Mapping.
• Drive implementation of Lean practices to eliminate waste, improve efficiency, and optimize flow throughout the workplace.
• Develop, validate, and optimize manufacturing processes to ensure compliance with IATF 16949 requirements, focusing on robust process controls and defect prevention.
• Support DFMEA and Process Failure Mode and Effects Analysis (PFMEA) for new products.
• Ensure all process and assembly equipment meets safety, quality, and capability standards, preventing hazards and ensuring ergonomic compliance.
• Specify, procure, and validate manufacturing equipment, tooling, and fixtures to meet production and quality requirements.
• Support adherence to IATF 16949 standards by ensuring robust process documentation, risk assessments, and control plans.
• Collaborate with Quality teams to maintain product conformity and drive corrective actions using structured problem-solving methodologies (DMAIC, 8D).
• Develop and improve Health & Safety practices for all processes, ensuring compliance with site policies and legal requirements.
• Lead cost reduction initiatives through process optimisation, value engineering, and capital expenditure recommendations.
• Provide accurate product costings and feasibility analyses to support business objectives.
• Work with cross-functional teams to support New Product Development by ensuring manufacturing processes are integrated from concept to launch.
• Prepare and submit reports detailing capital expenditure requirements, including justification and cost analysis.
• Establish and maintain process capability studies and monitor performance against control limits.
• Lead root cause analysis for process-related issues and implement permanent corrective actions.

The successful candidate will have at least 5 years’ relevant experience in a high-volume manufacturing environment supported by strong hands-on engineering skills and a passion for continuous improvement. They will possess excellent time management and prioritization skills in conjunction with excellent communication and influencing skills developed through the delivery of cross functional projects and the engagement of stakeholders. Applicants will be able to demonstrate initiative, drive and a strong desire to achieve results through the use of Lean tools and processes.

ABOUT US

Crane Building Services and Utilities (BS&U) is part of the Fluid Handling Division of Crane Co. founded in 1855, which is a global, multi-industry, New York Stock Exchange quoted company. We design, manufacture, package and market engineered flow control solutions for the HVAC and Utility sectors, with strong sales into key growth export markets.

The name Crane speaks of who we are, what we stand for and how our customers perceive us: A company with history and tradition, but also a company that is innovative, quality minded and one which acts with integrity and still holds to the resolution of its founder.

Crane Co. was founded on 4th July 1855 by Richard Teller Crane who made the following resolution:

"I am resolved to conduct my business in the strictest honesty and fairness; to avoid all deception and trickery; to deal fairly with both customers and competitors; to be liberal and just towards employees; and to put my whole mind upon the business."

The essence of this resolution is the business policy of Crane Co. today.

We believe that embracing inclusion and diversity is key to our success and as such we are seeking applications from candidates who will contribute their different backgrounds, cultures and experiences to our business.

Manufacturing Engineer

Ampthill, Bedfordshire

5 months

Great rate £ (Inside IR35)

Lockheed Martin (UK) Ampthill is a rapidly changing, dynamic part of the Lockheed Martin Corporation with both domestic and international customers.

It consists of business areas focusing on Platform Integration, Ground Based Air Defence, Special Projects and Weapons, which provide a variety of products and services to the Ministry of Defence and other customers.

We are looking for talented individuals to join the company, in return we offer an exciting and challenging career path and excellent work/life balance with a 4 day week (Mon-Thurs) and flexible working arrangements.

The role:

The Operations Engineering team provides engineering resources to support Operational performance and major product development projects; from design through to engineering build and production support, to end of life of product.

The team provides full product lifecycle support including prototype design & build, development and integration of the build documentation and supporting requirements of full production build.

This role will focus on involvement through the full product lifecycle, with the aim to reduce manufacturing costs and improve yield at all stages, which will directly impact our customers, whilst supporting the Programme in delivery of the milestones.

As part of the Operations Engineering Team, the Manufacturing Engineer is the recognised point of contact for all matters related to their area of expertise, providing engineering advice, problem solving and co-ordination of activities in support of current and future business.

You will drive a proactive approach to right first time quality to promote growth, will enhance the reputation of the business through exceptional quality standards and contribute towards a significant reduction in overall manufacturing costs.

What will I be doing?

• Develop manufacturing processes.
• Defining sequence of operations, procedures and production layouts for assemblies, equipment installation, processing and material handling taking into account flow and lean philosophies.
• Providing Basis of Estimates for engineering activities and shop floor operations across a range of technologies and disciplines.
• Identifying any new tooling & fixturing requirements.
• Experienced in the creation of Technical Requirement Specifications.
• Creation of detailed process instructions.
• Creation of Manufacturing BOM’s / routings to aid ease of manufacture.
• Active involvement in the Level 1 & 2 MDWT (Mission Directed Work Team) meetings.
• Support and contribute the relevant section of the Technology Roadmap to identify improvements to current manufacturing processes and future requirements.
• Assist with the Technical requirements of the relevant section of the Capital plan from definition to acceptance.
• Supporting full rate production of a range of products aligned to the LMUK Ampthill Business requirements.
• Close liaison of activities with Industrial Engineering, Production Engineering and other functions as necessary.
• Support with the business process reviews and generation / update of relevant documentation.

What are we looking for?

Are you a Manufacturing Engineer with detailed Assembly Processing knowledge (Electro Mechanical, Bonding, etc)?

Are you passionate about driving innovation and excellence in manufacturing? If the answer to this is 'Yes', we want to hear from you!

Our Operations Engineering team is at the forefront of supporting operational performance and delivering major product development projects, from concept design to production and beyond.

We provide full lifecycle engineering support, including prototype development, integration of build documentation and production support until the end of product life.

This exciting opportunity is based from our Advanced Manufacturing Facility in Ampthill, Bedfordshire and benefits from a 4 Day Working Week (Mon – Thu).

Your Role in Shaping the Future:

As a Manufacturing Engineer, you will play a crucial role throughout the product lifecycle, focusing on reducing manufacturing lead times while maintaining quality requirements.

Your contributions will have a direct impact on customer satisfaction while ensuring the timely delivery of project milestones.

As the go-to expert in your field, you will provide engineering insights, solve complex challenges, and coordinate activities to support current and future business goals.

You’ll also be a key driver of our commitment to "right-first-time" quality standards, enhancing both operational efficiency and the company’s reputation.

Key Responsibilities:

• Develop manufacturing processes.
• Defining sequence of operations, procedures and production layouts for assemblies, equipment installation, processing and material handling taking into account flow and lean philosophies.
• Providing Basis of Estimates for engineering activities and shop floor operations across a range of technologies and disciplines.
• Identifying any new tooling & fixturing requirements.
• Experienced in the creation of Technical Requirement Specifications.
• Creation of detailed process instructions.
• Creation of Manufacturing BOM’s / routings to aid ease of manufacture.
• Active involvement in the Level 1 & 2 MDWT (Mission Directed Work Team) meetings.
• Support and contribute the relevant section of the Technology Roadmap to identify improvements to current manufacturing processes and future requirements.
• Assist with the Technical requirements of the relevant section of the Capital plan from definition to acceptance.
• Supporting full rate production of a range of products aligned to the LMUK Ampthill Business requirements.
• Close liaison of activities with Industrial Engineering, Production Engineering and other functions as necessary.
• Support with the business process reviews and generation / update of relevant documentation.

Why Join Us?

You’ll be part of a forward-thinking team dedicated to pushing the boundaries of manufacturing innovation. As we continue to grow, your expertise will help shape the future of our products and ensure we consistently deliver the highest quality to our customers.

Skills required

• Detailed Assembly Processing knowledge (Electro Mechanical, Bonding, etc).
• Knowledge of Lean Manufacturing, Six Sigma and quality improvement tools.
• Experience with CAD software for generating 2D technical drawings.
• Solid understanding of MRP systems and experience managing BOMs and routings in SAP (or similar ERP systems).
• Proven ability to drive cultural and process change, improving efficiency and quality.
• A collaborative mindset with a passion for continuous improvement.
• Composite processing knowledge would be beneficial.

Lockheed Martin is committed to upholding principles of equal opportunity, fostering a work environment that is aligned with our core values of integrity, respect, and exceptional performance.

We recognize the importance of leveraging the unique talents and experiences of all our employees to drive innovation, deliver superior solutions, and maximize value for our customers.

Our focus is on identifying the most qualified candidate for each role, regardless of their background. If you are interested in a position, we invite you to share how your skills and perspectives could bolster our team and encourage you to apply, even if you feel your qualifications do not fully meet all the job criteria outlined in our advertisement.

Furthermore, Lockheed Martin is dedicated to ensuring our recruitment process is inclusive for all individuals. We are prepared to accommodate reasonable adjustments for applicants as needed. If you require assistance or adjustments to participate in the job application or interview process, please contact or call

Manufacturing Engineer - High Wycombe

Copello are working with an International defence client who are seeking a motivated and skilled Manufacturing Engineer to join their dynamic team. This role offers the opportunity to design, develop, implement, and optimise manufacturing processes for antennas, avionics, logic control units and associated technologies.

As a key member of the team, you will leverage your expertise to enhance design and manufacturing efficiency while ensuring the production of high-quality products. Collaboration will be central to the role, as you’ll partner with cross-functional teams, including design, quality and production, to align objectives and streamline operations.

Key responsibilities

Manufacturing Support

• Provide real-time technical support to resolve production issues related to paint and test processes, including equipment failures, quality concerns, and process inefficiencies.
• Conduct root cause analysis and implement corrective actions to minimise downtime and improve reliability.
• Collaborate cross-functionally with teams (e.g., Quality Control, Production, Maintenance) to address and resolve production challenges.
• Identify and implement opportunities for process optimisation, cost reduction, and continuous improvement.
• Specify, design, and integrate tools, jigs, fixtures, and other manufacturing aids to streamline paint and test operations.
• Develop, update, and maintain comprehensive production documentation, including job routings and work instructions.
• Monitor and analyse production data to track performance, identify trends, and suggest improvements.

New Product Development

• Support Design for Manufacture (DFM) activities for new and existing products, focusing on paint and test readiness.
• Manage manufacturing activities during the transition from development to production.
• Mitigate risks related to component handling, paint compatibility, and test reliability.

Test & Validation

• Provide support for functional and environmental testing, validation, and performance verification of products.
• Coordinate with test department and production teams to resolve any discrepancies or failure modes during testing.
• Ensure compliance with test specifications and quality standards.

Qualifications and experience

• Qualified in Manufacturing/Mechanical/Electrical Engineering or a related technical discipline, with experience in paint and test processes.
• Proven experience in a manufacturing or production engineering role, ideally within aerospace, electronics, or similar industries.
• Experience working within a defence environment.
• Strong understanding of manufacturing processes, equipment, and quality systems related to paint and test.
• Experience in identifying and delivering productivity improvements.
• Familiarity with lean manufacturing principles and Six Sigma methodologies would be advantageous.
• Knowledge of quality standards such as EN9100 advantageous.

Please note that SC Clearance must be obtainable for this role

If you feel you have the skills and experience please apply now, or send your CV to and we will be in touch for a further conversation.

Ready to engineer something that really matters?

We’re on the lookout for a Manufacturing Engineer to join our growing team in LEX . If you're someone who loves solving complex problems, thrives in a hands-on environment, and is passionate about continuous improvement, this could be your next big step.

What You’ll Be Doing:

This role is all about owning and optimising the processes that drive our consumables manufacturing. You’ll be leading process development, supporting high-volume production transfers, and ensuring everything runs smoothly—from yield targets to safety protocols.

You'll get to:

• Develop and improve manufacturing processes that make our consumables reliable and efficient
• Lead process development initiatives and support new product introductions
• Design and execute experiments to fine-tune process parameters
• Develop process control metrics and reporting tools
• Collaborate with engineers, scientists, and technicians to drive results
• Write SOPs and keep documentation up to date
• Train and mentor junior staff (yes, you’ll be the go-to expert!)
• Spot risks, highlight resource conflicts, and propose smart solutions
• Be a champion of health & safety, continuous improvement, and best practices

We’re looking for someone who’s not just technically strong, but also proactive, hands-on, and able to work across teams.

Requirements

Here’s what we’d love to see:

• Degree (or equivalent) in engineering or related field
• 3+ years in cleanroom or high-tech manufacturing environments
• Solid experience with heat sealing and ultrasonic welding
• Practical problem-solving skills and mechanical intuition
• Ability to manage multiple projects and priorities
• Comfortable creating risk/COSHH assessments and technical documentation
• Team player who communicates clearly across disciplines

Bonus if you're familiar with ISO13485, and if you’ve got Lean Six Sigma skills? Even better.

Who You’ll Work With:

This role sits at the heart of manufacturing and connects you with:

• The Director of Cartridge Manufacturing (your direct manager)
• Fellow engineers and technicians
• Integration teams and scientists
• External development partners

Why Join Us?

Because we care about what we build and the people who build it. You'll be part of a collaborative environment, working on innovative technology, and shaping the future of high-volume consumable production. Plus, you’ll have the space to grow, try new things, and make a real impact.

Who are we and what does the future hold for you? 

LEX Diagnostics was founded in 2020. Our innovative system is designed to integrate effortlessly into primary care settings, bringing PCR sensitivity to urgent care centres, physicians labs, and pharmacies, returning results significantly quicker than other molecular platforms. 

2025 is a milestone year for us as we’ve just submitted dual 510(k) CLIA waiver applications to the U.S. FDA. This provides as opportunity to be an important part of a high impact launch that will enhance your future career credentials. 

The Future 

In December 2023, QuidelOrtho invested in LEX Diagnostics, which included the exclusive option to acquire the company up to or shortly after 510(k) clearance by the FDA. In QuidelOrtho, we have an investment partner that recognises the capabilities of our are excited for what we can continue to build together. 

What this means for you  

• More Resources - Manufacturing scale, regulatory & distribution infrastructure 
• R&D Focus - Concentrated innovation around LEX platform and test menu 
• Career Mobility - As well as creating a cross-disciplinary development environment in science and engineering, we hope that LEX employees can transition into broader roles (e.g., regulatory affairs, global supply chain, sales, clinical affairs) across the integrated organisation. 
• Global Exposure - International workflows & markets (US & EU) 
• Impact & Stability - Increased product reach and organisational strength 
• Development - Structured programs and training opportunities 

2026 should see the elevation of the LEX Diagnostics team from startup environment into a well supported, international diagnostics powerhouse without sacrificing the very thing that made our team successful, innovation.

You’ll help drive forward a unique, market-leading platform within a growing team that needs to invest in your development and career growth. 

Our working culture encourages entrepreneurship, shared ideas, and technical collaboration, while providing you the freedom to do your best work.

Benefits

We also offer fantastic employee benefits including: 

• Employer pension contribution of 10% (+3% personal contribution) 
• Private Medical Insurance 
• Life insurance 
• 25 days’ annual holiday plus bank holidays 
• Discounts and memberships to local sports facilities and the theatre 

Apply now and help us bring ultra-fast PCR to the point of care.

At LEX Diagnostics , we’re not just making consumables – we’re helping doctors and patients get answers faster, right when they’re needed most.

As a Manufacturing Technician , you’ll play a hands-on role in producing the cartridge consumables that power our breakthrough diagnostics system. You’ll be working with a close-knit team on the manufacturing line, using your practical skills and experience with production equipment to keep quality high and output steady.

What you’ll be doing:

• Assembling consumables using machinery, presses, and welding equipment
• Carrying out practical, hands-on tasks to keep production moving smoothly
• Checking builds meet quality and safety standards during and after assembly
• Logging work accurately to keep production records up to date
• Spotting issues early, raising them quickly, and suggesting improvements
• Taking ownership of your work and seeing the real-world impact as products move closer to launch

(Current hours: 09:00–17:30. Moving to shift patterns of 06:00–14:00 and 14:00–22:00 as we expand.)

Requirements

Requirements – What we’re looking for:

• Practical, hands-on experience in a manufacturing or production line role
• Skilled in using assembly machinery, presses, or welders (training provided where needed)
• Comfortable following standard processes while adapting when things change
• Experience working in cleanroom environments (ISO 13485 / cGMP a plus)
• Familiar with Quality Management Systems (QMS)
• Strong communication and teamwork skills
• A proactive, can-do attitude – quick to step in when challenges arise

Benefits

2025 is a milestone year for us. We’ve just submitted dual 510(k) CLIA waiver applications to the U.S. FDA. That means the consumables you help produce will be central to a high-impact launch that can elevate your own career as much as it strengthens us.

And you’ll be part of a growing team that’s scaling from startup to international diagnostics powerhouse, without losing the innovation and entrepreneurial spirit that made us successful.

What we offer

• We want you to thrive, personally and professionally.
• Salary of £27,000 to £35,000 per annum depending on experience.
• 10% employer pension contribution (+3% personal contribution)
• Private Medical Insurance & Life Insurance (Family Cover)
• 25 days’ holiday plus bank holidays
• Discounts and memberships to local sports facilities and theatres

Ready to make an impact?

This is your opportunity to join a team that’s shaping the future of point-of-need diagnostics. If you’re hands-on, proactive, and excited to see your work make a difference in healthcare, we’d love to hear from you.

Apply now and help us deliver answers that matter.

Lead Manufacturing Engineer

NW London

Are you a hands-on Manufacturing Engineer with a passion for process improvement, NPI, and driving innovation in electronics or device assembly, ready to take full ownership of a busy manufacturing area and shape its future. This isn’t just a technical role — you’ll have the authority to drive strategy, optimise processes, and influence senior leaders to deliver tangible business impact.

Join a growing business that blends cutting-edge product development with high-mix, low-to-medium volume manufacturing. You'll work alongside cross-functional teams to optimise processes, support new product launches, and lead continuous improvement initiatives that truly make an impact.

You won’t be stuck firefighting here. This is a real opportunity to shape how things are made — from new product launches to smart process improvements in a high-mix, low-to-medium volume manufacturing environment.

The role in 60 seconds:

You’ll own the manufacturing area end-to-end, from process design to execution and improvement, leading NPI projects, turning prototypes into optimised production processes. Implement APQP, PFMEA, control plans and capability studies to ensure product quality. Drive Lean and Six Sigma initiatives that improve efficiency, yield, and cost-effectiveness. Influence board-level decisions with clear strategy and data-backed recommendations Solve complex production challenges and see your ideas implemented on the shop floor. You’ll work with passionate teams across R&D, Quality, Production and Supply Chain.

Why this might just be your next big move:

• You’ll be more than a cog in the wheel — your voice matters here
• You’ll play a key role in bringing new tech from prototype to production
• You’ll leave things better than you found them — and be recognised for it
• You’ll collaborate with sharp, cross-functional teams in a growing, tech-led business
• You’ll be hands-on — not desk-bound

Implement APQP, PFMEA, control plans, , and capability studies to ensure product quality

Drive Lean and Six Sigma initiatives that improve efficiency, yield, and cost-effectiveness

Influence board-level decisions with clear strategy and data-backed recommendations

Solve complex production challenges and see your ideas implemented on the shop floor

What we’re looking for:

• 10–12 years’ experience in electronics or device assembly manufacturing
• Proven track record in NPI, APQP, and continuous improvement
• Expertise in Lean Manufacturing, Six Sigma (Green Belt or higher preferred)
• CAD proficiency (SolidWorks, AutoCAD) and ERP/MES systems experience
• Ability to influence senior stakeholders and lead change without direct line management

Bonus points for:

• Lean Six Sigma certification (Green Belt or above)
• Familiarity with ISO 9001, 13485, or IATF 16949
• ERP/MES or manufacturing analytics experience

If this role sounds like you drop me a message or apply now to learn more.

About us:

Stevenage sheet metal manufactures high quality engineered parts to a variety of industries from pharmaceutical through to automotive. SSM has 45 years of experience within manufacturing and specialises in sheet metal laser cutting, forming and fabrication.

About the role:

The Manufacturing General labourer is responsible for performing a variety of activities around the manufacturing facility, from production support through to general housekeeping. The general labourer should be able to work independently, but also work well in a team environment, following instructions from supervisors and other personnel. The general labourer should be able to work in a safe and efficient manner.

Responsibilities:

· Deburring

· Carry out chemical cleaning of welded components

· Assist manufacturing activities as required

· Support with transporting goods around the manufacturing facility

· Perform other duties assigned by supervision

Candidate requirements:

· Able to follow instructions

· Quality driven

· Self-sufficient

· Good oral and written communication skills

· Team player, hardworking and reliable

· Able to operate various hand and power tools

Job Type: Full-time

Pay: £11.50-£12.15 per hour

Expected hours: 40 per week

Work Location: In person

Manufacturing Process Engineer (NPI Projects)

London (Greenwich) | Up to circa £42 to 47.50 per hour (Umbrella) | Long-Term Contract

About the Role

We’re looking for a Manufacturing Process Engineer to help shape the future of assembly processes. In this role, you’ll design and implement lean improvements that make production safer, more efficient, and more sustainable. You’ll work closely with R&D, support projects from concept through to delivery, and ensure processes meet the highest standards of quality and compliance.

What’s in it for you?

• Competitive pay and a secure long-term contract
• A collaborative and supportive team culture
• The chance to make a real impact on products that support critical global infrastructure
• Work with cutting-edge technologies that are making a difference worldwide

What you’ll be doing

• Design & Improve: Create lean process improvements for tools, equipment, and assembly methods
• Deliver Change: Manage projects from concept to handover, keeping efficiency and timelines on track
• Validate & Test: Ensure new tooling and processes are reliable and compliant before production
• Keep it Safe: Lead PUWER assessments, risk analysis, and safety compliance
• Collaborate: Partner with R&D, training schools, and wider teams to support innovation and development
• Measure & Monitor: Define KPIs, track progress, and ensure budgets and quality targets are met

What we’re looking for

• A degree in Mechanical, Industrial, Production, or related Engineering field
• Hands-on experience in manufacturing or technical environments
• Knowledge of ISO9001/TL9000, Lean, Six Sigma, and regulated industries
• A methodical problem-solver with excellent organisational skills
• Willingness to learn systems such as SAP and sDMS

How to apply

If this sounds like the right role for you, we’d love to hear from you. Please apply via LinkedIn.

• Oversee daily manufacturing operations, ensuring targets for production volume, quality, and cost are met.
• Develop and implement strategic plans to improve operational efficiency, reduce waste, and enhance product quality.
• Manage the production workforce, including hiring, training, performance management, and scheduling.
• Implement and maintain Lean Manufacturing principles and Continuous Improvement initiatives.
• Oversee the supply chain, ensuring timely procurement of materials and effective inventory management.
• Ensure strict adherence to all health, safety, and environmental regulations.
• Develop and manage departmental budgets, monitoring expenditures and identifying cost-saving opportunities.
• Collaborate with engineering, quality assurance, and maintenance departments to resolve production issues.
• Lead initiatives for process optimization and technology adoption to enhance manufacturing capabilities.
• Analyze production data to identify trends, measure performance, and drive data-informed decisions.
• Foster a culture of safety, accountability, and continuous improvement among the operations team.

• Bachelor's degree in Manufacturing Engineering, Operations Management, Business Administration, or a related field.
• Minimum of 7 years of experience in manufacturing operations, with at least 3 years in a management or supervisory role.
• Demonstrated experience with Lean Manufacturing, Six Sigma, or other continuous improvement methodologies.
• Strong understanding of production planning, inventory control, and supply chain principles.
• Excellent leadership, team management, and communication skills.
• Proven ability to manage budgets and P&L responsibilities.
• Experience with ERP systems and manufacturing execution systems (MES).
• Knowledge of quality management systems (e.g., ISO 9001).
• Ability to work effectively in a demanding, hands-on environment.