207 Manufacturing jobs in Newport

Manufacturing Engineer

SO14 Newtown, South East BAE Systems

Posted today

Job Viewed

Tap Again To Close

Job Description

Job Title:  Manufacturing Engineer

Location: Portsmouth – We offer a range of hybrid and flexible working arrangements – please speak to your recruiter about the options for this particular role

Salary: Up to £50,000 (dependent on skills and experience)  

What you’ll be doing:

  • Applies knowledge, skill & experience in company products, services, approaches, techniques and governance. Applies experience and works across the supported platform, resolves common engineering problems.
  • Undertake design and/or provide advice in the development of Additive Manufacturing models and products to support the business ensuring they are fit for purpose and meet regulatory & legislative requirements, and safety standards
  • Provide support for assurance that the design is adequate i.e. it is robust and provide supporting documentation for the safety case
  • Act as a project focal point for specific tasks ensuring best practices are adopted and embedded. This may involve developing processes by studying product requirements; researching, designing, modifying, and testing development methods and equipment by conferring with field specialists and technologists.
  • Support justifications/business cases that seek to improve business performance, and thus provide optimised return on capital investment.
  • Provide realistic programme status, identify problem areas and implement agreed recovery plans

Your skills and experiences:

  • Understands theories and concepts in an engineering discipline area approaches, processes and procedures gained through professional qualification or equivalent
  • Understands engineering approaches, processes and procedures
  • Competent in the use of 3D modelling systems and AMC Techniques,
  • Skills to assist with maintenance and repairs of AMC equipment as necessary, ensuring all equipment is in good working condition

Benefits

As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts – you may also be eligible for an annual incentive.

The Ship Repair Manufacturing Team:

The Manufacturing Engineering department is a small dynamic team where flexibility and collaboration are key. We work across a wide variety of task and project – meaning no two days are the same. The department plays many roles within the business, actively supports one another and takes pride in delivering quality results and solutions in an ever-changing environment. If you enjoy variety, problem solving and being part of a close-knit team, you’ll find working in the team both engaging and rewarding

Why BAE Systems?

This is a place where you’ll be able to make a real difference. You’ll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you’ll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments.

Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks.

Closing Date 21st October 2025

We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.

#LI-AP1

#LI-Hybrid

This advertiser has chosen not to accept applicants from your region.

Manufacturing Engineer

PO12 Privett, South East BAE Systems

Posted today

Job Viewed

Tap Again To Close

Job Description

Job Title:  Manufacturing Engineer

Location: Portsmouth – We offer a range of hybrid and flexible working arrangements – please speak to your recruiter about the options for this particular role

Salary: Up to £50,000 (dependent on skills and experience)  

What you’ll be doing:

  • Applies knowledge, skill & experience in company products, services, approaches, techniques and governance. Applies experience and works across the supported platform, resolves common engineering problems.
  • Undertake design and/or provide advice in the development of Additive Manufacturing models and products to support the business ensuring they are fit for purpose and meet regulatory & legislative requirements, and safety standards
  • Provide support for assurance that the design is adequate i.e. it is robust and provide supporting documentation for the safety case
  • Act as a project focal point for specific tasks ensuring best practices are adopted and embedded. This may involve developing processes by studying product requirements; researching, designing, modifying, and testing development methods and equipment by conferring with field specialists and technologists.
  • Support justifications/business cases that seek to improve business performance, and thus provide optimised return on capital investment.
  • Provide realistic programme status, identify problem areas and implement agreed recovery plans

Your skills and experiences:

  • Understands theories and concepts in an engineering discipline area approaches, processes and procedures gained through professional qualification or equivalent
  • Understands engineering approaches, processes and procedures
  • Competent in the use of 3D modelling systems and AMC Techniques,
  • Skills to assist with maintenance and repairs of AMC equipment as necessary, ensuring all equipment is in good working condition

Benefits

As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts – you may also be eligible for an annual incentive.

The Ship Repair Manufacturing Team:

The Manufacturing Engineering department is a small dynamic team where flexibility and collaboration are key. We work across a wide variety of task and project – meaning no two days are the same. The department plays many roles within the business, actively supports one another and takes pride in delivering quality results and solutions in an ever-changing environment. If you enjoy variety, problem solving and being part of a close-knit team, you’ll find working in the team both engaging and rewarding

Why BAE Systems?

This is a place where you’ll be able to make a real difference. You’ll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you’ll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments.

Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks.

Closing Date 21st October 2025

We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.

#LI-AP1

#LI-Hybrid

This advertiser has chosen not to accept applicants from your region.

Manufacturing Engineer

Portsmouth, South East BAE Systems

Posted today

Job Viewed

Tap Again To Close

Job Description

Job Title:  Manufacturing Engineer

Location: Portsmouth – We offer a range of hybrid and flexible working arrangements – please speak to your recruiter about the options for this particular role

Salary: Up to £50,000 (dependent on skills and experience)  

What you’ll be doing:

  • Applies knowledge, skill & experience in company products, services, approaches, techniques and governance. Applies experience and works across the supported platform, resolves common engineering problems.
  • Undertake design and/or provide advice in the development of Additive Manufacturing models and products to support the business ensuring they are fit for purpose and meet regulatory & legislative requirements, and safety standards
  • Provide support for assurance that the design is adequate i.e. it is robust and provide supporting documentation for the safety case
  • Act as a project focal point for specific tasks ensuring best practices are adopted and embedded. This may involve developing processes by studying product requirements; researching, designing, modifying, and testing development methods and equipment by conferring with field specialists and technologists.
  • Support justifications/business cases that seek to improve business performance, and thus provide optimised return on capital investment.
  • Provide realistic programme status, identify problem areas and implement agreed recovery plans

Your skills and experiences:

  • Understands theories and concepts in an engineering discipline area approaches, processes and procedures gained through professional qualification or equivalent
  • Understands engineering approaches, processes and procedures
  • Competent in the use of 3D modelling systems and AMC Techniques,
  • Skills to assist with maintenance and repairs of AMC equipment as necessary, ensuring all equipment is in good working condition

Benefits

As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts – you may also be eligible for an annual incentive.

The Ship Repair Manufacturing Team:

The Manufacturing Engineering department is a small dynamic team where flexibility and collaboration are key. We work across a wide variety of task and project – meaning no two days are the same. The department plays many roles within the business, actively supports one another and takes pride in delivering quality results and solutions in an ever-changing environment. If you enjoy variety, problem solving and being part of a close-knit team, you’ll find working in the team both engaging and rewarding

Why BAE Systems?

This is a place where you’ll be able to make a real difference. You’ll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you’ll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments.

Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks.

Closing Date 21st October 2025

We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.

#LI-AP1

#LI-Hybrid

This advertiser has chosen not to accept applicants from your region.

Manufacturing Engineer

PO7 Waterlooville, South East BAE Systems

Posted today

Job Viewed

Tap Again To Close

Job Description

Job Title:  Manufacturing Engineer

Location: Portsmouth – We offer a range of hybrid and flexible working arrangements – please speak to your recruiter about the options for this particular role

Salary: Up to £50,000 (dependent on skills and experience)  

What you’ll be doing:

  • Applies knowledge, skill & experience in company products, services, approaches, techniques and governance. Applies experience and works across the supported platform, resolves common engineering problems.
  • Undertake design and/or provide advice in the development of Additive Manufacturing models and products to support the business ensuring they are fit for purpose and meet regulatory & legislative requirements, and safety standards
  • Provide support for assurance that the design is adequate i.e. it is robust and provide supporting documentation for the safety case
  • Act as a project focal point for specific tasks ensuring best practices are adopted and embedded. This may involve developing processes by studying product requirements; researching, designing, modifying, and testing development methods and equipment by conferring with field specialists and technologists.
  • Support justifications/business cases that seek to improve business performance, and thus provide optimised return on capital investment.
  • Provide realistic programme status, identify problem areas and implement agreed recovery plans

Your skills and experiences:

  • Understands theories and concepts in an engineering discipline area approaches, processes and procedures gained through professional qualification or equivalent
  • Understands engineering approaches, processes and procedures
  • Competent in the use of 3D modelling systems and AMC Techniques,
  • Skills to assist with maintenance and repairs of AMC equipment as necessary, ensuring all equipment is in good working condition

Benefits

As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts – you may also be eligible for an annual incentive.

The Ship Repair Manufacturing Team:

The Manufacturing Engineering department is a small dynamic team where flexibility and collaboration are key. We work across a wide variety of task and project – meaning no two days are the same. The department plays many roles within the business, actively supports one another and takes pride in delivering quality results and solutions in an ever-changing environment. If you enjoy variety, problem solving and being part of a close-knit team, you’ll find working in the team both engaging and rewarding

Why BAE Systems?

This is a place where you’ll be able to make a real difference. You’ll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you’ll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments.

Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks.

Closing Date 21st October 2025

We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.

#LI-AP1

#LI-Hybrid

This advertiser has chosen not to accept applicants from your region.

Manufacturing Engineer

PO4 Milton, South East BAE Systems

Posted today

Job Viewed

Tap Again To Close

Job Description

Job Title:  Manufacturing Engineer

Location: Portsmouth – We offer a range of hybrid and flexible working arrangements – please speak to your recruiter about the options for this particular role

Salary: Up to £50,000 (dependent on skills and experience)  

What you’ll be doing:

  • Applies knowledge, skill & experience in company products, services, approaches, techniques and governance. Applies experience and works across the supported platform, resolves common engineering problems.
  • Undertake design and/or provide advice in the development of Additive Manufacturing models and products to support the business ensuring they are fit for purpose and meet regulatory & legislative requirements, and safety standards
  • Provide support for assurance that the design is adequate i.e. it is robust and provide supporting documentation for the safety case
  • Act as a project focal point for specific tasks ensuring best practices are adopted and embedded. This may involve developing processes by studying product requirements; researching, designing, modifying, and testing development methods and equipment by conferring with field specialists and technologists.
  • Support justifications/business cases that seek to improve business performance, and thus provide optimised return on capital investment.
  • Provide realistic programme status, identify problem areas and implement agreed recovery plans

Your skills and experiences:

  • Understands theories and concepts in an engineering discipline area approaches, processes and procedures gained through professional qualification or equivalent
  • Understands engineering approaches, processes and procedures
  • Competent in the use of 3D modelling systems and AMC Techniques,
  • Skills to assist with maintenance and repairs of AMC equipment as necessary, ensuring all equipment is in good working condition

Benefits

As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts – you may also be eligible for an annual incentive.

The Ship Repair Manufacturing Team:

The Manufacturing Engineering department is a small dynamic team where flexibility and collaboration are key. We work across a wide variety of task and project – meaning no two days are the same. The department plays many roles within the business, actively supports one another and takes pride in delivering quality results and solutions in an ever-changing environment. If you enjoy variety, problem solving and being part of a close-knit team, you’ll find working in the team both engaging and rewarding

Why BAE Systems?

This is a place where you’ll be able to make a real difference. You’ll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you’ll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments.

Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks.

Closing Date 21st October 2025

We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.

#LI-AP1

#LI-Hybrid

This advertiser has chosen not to accept applicants from your region.

Manufacturing Engineer

PO18 Chichester, South East BAE Systems

Posted today

Job Viewed

Tap Again To Close

Job Description

Job Title:  Manufacturing Engineer

Location: Portsmouth – We offer a range of hybrid and flexible working arrangements – please speak to your recruiter about the options for this particular role

Salary: Up to £50,000 (dependent on skills and experience)  

What you’ll be doing:

  • Applies knowledge, skill & experience in company products, services, approaches, techniques and governance. Applies experience and works across the supported platform, resolves common engineering problems.
  • Undertake design and/or provide advice in the development of Additive Manufacturing models and products to support the business ensuring they are fit for purpose and meet regulatory & legislative requirements, and safety standards
  • Provide support for assurance that the design is adequate i.e. it is robust and provide supporting documentation for the safety case
  • Act as a project focal point for specific tasks ensuring best practices are adopted and embedded. This may involve developing processes by studying product requirements; researching, designing, modifying, and testing development methods and equipment by conferring with field specialists and technologists.
  • Support justifications/business cases that seek to improve business performance, and thus provide optimised return on capital investment.
  • Provide realistic programme status, identify problem areas and implement agreed recovery plans

Your skills and experiences:

  • Understands theories and concepts in an engineering discipline area approaches, processes and procedures gained through professional qualification or equivalent
  • Understands engineering approaches, processes and procedures
  • Competent in the use of 3D modelling systems and AMC Techniques,
  • Skills to assist with maintenance and repairs of AMC equipment as necessary, ensuring all equipment is in good working condition

Benefits

As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts – you may also be eligible for an annual incentive.

The Ship Repair Manufacturing Team:

The Manufacturing Engineering department is a small dynamic team where flexibility and collaboration are key. We work across a wide variety of task and project – meaning no two days are the same. The department plays many roles within the business, actively supports one another and takes pride in delivering quality results and solutions in an ever-changing environment. If you enjoy variety, problem solving and being part of a close-knit team, you’ll find working in the team both engaging and rewarding

Why BAE Systems?

This is a place where you’ll be able to make a real difference. You’ll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you’ll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments.

Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks.

Closing Date 21st October 2025

We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.

#LI-AP1

#LI-Hybrid

This advertiser has chosen not to accept applicants from your region.

Manufacturing Engineer

PO18 Stoughton, South East BAE Systems

Posted today

Job Viewed

Tap Again To Close

Job Description

Job Title:  Manufacturing Engineer

Location: Portsmouth – We offer a range of hybrid and flexible working arrangements – please speak to your recruiter about the options for this particular role

Salary: Up to £50,000 (dependent on skills and experience)  

What you’ll be doing:

  • Applies knowledge, skill & experience in company products, services, approaches, techniques and governance. Applies experience and works across the supported platform, resolves common engineering problems.
  • Undertake design and/or provide advice in the development of Additive Manufacturing models and products to support the business ensuring they are fit for purpose and meet regulatory & legislative requirements, and safety standards
  • Provide support for assurance that the design is adequate i.e. it is robust and provide supporting documentation for the safety case
  • Act as a project focal point for specific tasks ensuring best practices are adopted and embedded. This may involve developing processes by studying product requirements; researching, designing, modifying, and testing development methods and equipment by conferring with field specialists and technologists.
  • Support justifications/business cases that seek to improve business performance, and thus provide optimised return on capital investment.
  • Provide realistic programme status, identify problem areas and implement agreed recovery plans

Your skills and experiences:

  • Understands theories and concepts in an engineering discipline area approaches, processes and procedures gained through professional qualification or equivalent
  • Understands engineering approaches, processes and procedures
  • Competent in the use of 3D modelling systems and AMC Techniques,
  • Skills to assist with maintenance and repairs of AMC equipment as necessary, ensuring all equipment is in good working condition

Benefits

As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts – you may also be eligible for an annual incentive.

The Ship Repair Manufacturing Team:

The Manufacturing Engineering department is a small dynamic team where flexibility and collaboration are key. We work across a wide variety of task and project – meaning no two days are the same. The department plays many roles within the business, actively supports one another and takes pride in delivering quality results and solutions in an ever-changing environment. If you enjoy variety, problem solving and being part of a close-knit team, you’ll find working in the team both engaging and rewarding

Why BAE Systems?

This is a place where you’ll be able to make a real difference. You’ll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you’ll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments.

Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks.

Closing Date 21st October 2025

We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.

#LI-AP1

#LI-Hybrid

This advertiser has chosen not to accept applicants from your region.
Be The First To Know

About the latest Manufacturing Jobs in Newport !

Manufacturing Engineer

PO12 Privett, South East BAE Systems

Posted today

Job Viewed

Tap Again To Close

Job Description

Job Title:  Manufacturing Engineer

Location: Portsmouth – We offer a range of hybrid and flexible working arrangements – please speak to your recruiter about the options for this particular role

Salary: Up to £50,000 (dependent on skills and experience)  

What you’ll be doing:

  • Applies knowledge, skill & experience in company products, services, approaches, techniques and governance. Applies experience and works across the supported platform, resolves common engineering problems.
  • Undertake design and/or provide advice in the development of Additive Manufacturing models and products to support the business ensuring they are fit for purpose and meet regulatory & legislative requirements, and safety standards
  • Provide support for assurance that the design is adequate i.e. it is robust and provide supporting documentation for the safety case
  • Act as a project focal point for specific tasks ensuring best practices are adopted and embedded. This may involve developing processes by studying product requirements; researching, designing, modifying, and testing development methods and equipment by conferring with field specialists and technologists.
  • Support justifications/business cases that seek to improve business performance, and thus provide optimised return on capital investment.
  • Provide realistic programme status, identify problem areas and implement agreed recovery plans

Your skills and experiences:

  • Understands theories and concepts in an engineering discipline area approaches, processes and procedures gained through professional qualification or equivalent
  • Understands engineering approaches, processes and procedures
  • Competent in the use of 3D modelling systems and AMC Techniques,
  • Skills to assist with maintenance and repairs of AMC equipment as necessary, ensuring all equipment is in good working condition

Benefits

As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts – you may also be eligible for an annual incentive.

The Ship Repair Manufacturing Team:

The Manufacturing Engineering department is a small dynamic team where flexibility and collaboration are key. We work across a wide variety of task and project – meaning no two days are the same. The department plays many roles within the business, actively supports one another and takes pride in delivering quality results and solutions in an ever-changing environment. If you enjoy variety, problem solving and being part of a close-knit team, you’ll find working in the team both engaging and rewarding

Why BAE Systems?

This is a place where you’ll be able to make a real difference. You’ll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you’ll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments.

Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks.

Closing Date 21st October 2025

We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.

#LI-AP1

#LI-Hybrid

This advertiser has chosen not to accept applicants from your region.

Manufacturing Engineer

Portsmouth, South East BAE Systems

Posted today

Job Viewed

Tap Again To Close

Job Description

Job Title:  Manufacturing Engineer

Location: Portsmouth – We offer a range of hybrid and flexible working arrangements – please speak to your recruiter about the options for this particular role

Salary: Up to £50,000 (dependent on skills and experience)  

What you’ll be doing:

  • Applies knowledge, skill & experience in company products, services, approaches, techniques and governance. Applies experience and works across the supported platform, resolves common engineering problems.
  • Undertake design and/or provide advice in the development of Additive Manufacturing models and products to support the business ensuring they are fit for purpose and meet regulatory & legislative requirements, and safety standards
  • Provide support for assurance that the design is adequate i.e. it is robust and provide supporting documentation for the safety case
  • Act as a project focal point for specific tasks ensuring best practices are adopted and embedded. This may involve developing processes by studying product requirements; researching, designing, modifying, and testing development methods and equipment by conferring with field specialists and technologists.
  • Support justifications/business cases that seek to improve business performance, and thus provide optimised return on capital investment.
  • Provide realistic programme status, identify problem areas and implement agreed recovery plans

Your skills and experiences:

  • Understands theories and concepts in an engineering discipline area approaches, processes and procedures gained through professional qualification or equivalent
  • Understands engineering approaches, processes and procedures
  • Competent in the use of 3D modelling systems and AMC Techniques,
  • Skills to assist with maintenance and repairs of AMC equipment as necessary, ensuring all equipment is in good working condition

Benefits

As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts – you may also be eligible for an annual incentive.

The Ship Repair Manufacturing Team:

The Manufacturing Engineering department is a small dynamic team where flexibility and collaboration are key. We work across a wide variety of task and project – meaning no two days are the same. The department plays many roles within the business, actively supports one another and takes pride in delivering quality results and solutions in an ever-changing environment. If you enjoy variety, problem solving and being part of a close-knit team, you’ll find working in the team both engaging and rewarding

Why BAE Systems?

This is a place where you’ll be able to make a real difference. You’ll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you’ll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments.

Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks.

Closing Date 21st October 2025

We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.

#LI-AP1

#LI-Hybrid

This advertiser has chosen not to accept applicants from your region.

Manufacturing Engineer

PO7 Waterlooville, South East BAE Systems

Posted today

Job Viewed

Tap Again To Close

Job Description

Job Title:  Manufacturing Engineer

Location: Portsmouth – We offer a range of hybrid and flexible working arrangements – please speak to your recruiter about the options for this particular role

Salary: Up to £50,000 (dependent on skills and experience)  

What you’ll be doing:

  • Applies knowledge, skill & experience in company products, services, approaches, techniques and governance. Applies experience and works across the supported platform, resolves common engineering problems.
  • Undertake design and/or provide advice in the development of Additive Manufacturing models and products to support the business ensuring they are fit for purpose and meet regulatory & legislative requirements, and safety standards
  • Provide support for assurance that the design is adequate i.e. it is robust and provide supporting documentation for the safety case
  • Act as a project focal point for specific tasks ensuring best practices are adopted and embedded. This may involve developing processes by studying product requirements; researching, designing, modifying, and testing development methods and equipment by conferring with field specialists and technologists.
  • Support justifications/business cases that seek to improve business performance, and thus provide optimised return on capital investment.
  • Provide realistic programme status, identify problem areas and implement agreed recovery plans

Your skills and experiences:

  • Understands theories and concepts in an engineering discipline area approaches, processes and procedures gained through professional qualification or equivalent
  • Understands engineering approaches, processes and procedures
  • Competent in the use of 3D modelling systems and AMC Techniques,
  • Skills to assist with maintenance and repairs of AMC equipment as necessary, ensuring all equipment is in good working condition

Benefits

As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts – you may also be eligible for an annual incentive.

The Ship Repair Manufacturing Team:

The Manufacturing Engineering department is a small dynamic team where flexibility and collaboration are key. We work across a wide variety of task and project – meaning no two days are the same. The department plays many roles within the business, actively supports one another and takes pride in delivering quality results and solutions in an ever-changing environment. If you enjoy variety, problem solving and being part of a close-knit team, you’ll find working in the team both engaging and rewarding

Why BAE Systems?

This is a place where you’ll be able to make a real difference. You’ll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you’ll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments.

Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks.

Closing Date 21st October 2025

We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.

#LI-AP1

#LI-Hybrid

This advertiser has chosen not to accept applicants from your region.
 

Nearby Locations

Other Jobs Near Me

Industry

  1. request_quote Accounting
  2. work Administrative
  3. eco Agriculture Forestry
  4. smart_toy AI & Emerging Technologies
  5. school Apprenticeships & Trainee
  6. apartment Architecture
  7. palette Arts & Entertainment
  8. directions_car Automotive
  9. flight_takeoff Aviation
  10. account_balance Banking & Finance
  11. local_florist Beauty & Wellness
  12. restaurant Catering
  13. volunteer_activism Charity & Voluntary
  14. science Chemical Engineering
  15. child_friendly Childcare
  16. foundation Civil Engineering
  17. clean_hands Cleaning & Sanitation
  18. diversity_3 Community & Social Care
  19. construction Construction
  20. brush Creative & Digital
  21. currency_bitcoin Crypto & Blockchain
  22. support_agent Customer Service & Helpdesk
  23. medical_services Dental
  24. medical_services Driving & Transport
  25. medical_services E Commerce & Social Media
  26. school Education & Teaching
  27. electrical_services Electrical Engineering
  28. bolt Energy
  29. local_mall Fmcg
  30. gavel Government & Non Profit
  31. emoji_events Graduate
  32. health_and_safety Healthcare
  33. beach_access Hospitality & Tourism
  34. groups Human Resources
  35. precision_manufacturing Industrial Engineering
  36. security Information Security
  37. handyman Installation & Maintenance
  38. policy Insurance
  39. code IT & Software
  40. gavel Legal
  41. sports_soccer Leisure & Sports
  42. inventory_2 Logistics & Warehousing
  43. supervisor_account Management
  44. supervisor_account Management Consultancy
  45. supervisor_account Manufacturing & Production
  46. campaign Marketing
  47. build Mechanical Engineering
  48. perm_media Media & PR
  49. local_hospital Medical
  50. local_hospital Military & Public Safety
  51. local_hospital Mining
  52. medical_services Nursing
  53. local_gas_station Oil & Gas
  54. biotech Pharmaceutical
  55. checklist_rtl Project Management
  56. shopping_bag Purchasing
  57. home_work Real Estate
  58. person_search Recruitment Consultancy
  59. store Retail
  60. point_of_sale Sales
  61. science Scientific Research & Development
  62. wifi Telecoms
  63. psychology Therapy
  64. pets Veterinary
View All Manufacturing Jobs View All Jobs in Newport