43 Senior Welders jobs in the United Kingdom

Berry Recruitment are currently looking for Welders in the Norwich and Fakenham area.

Your key responsibilities would be:

• Perform MIG and TIG welding on steel, stainless steel, and other materials
• Read and interpret technical drawings and fabrication diagram
• Carry out quality checks and ensure strong, clean welds
• Assist with fabrication and assembly tasks as needed

Requirements:

• Proven experience in MIG and TIG welding
• Ability to read and work from engineering drawings
• Knowledge of metal fabrication and workshop safety practices
• Welding qualifications or certifications (desirable)

Shift pattern: Monday-Friday 40 hours per week.

15.00 per hour during probation period.

This is a permanent position.

Please note that no terminology in this advert is intended to discriminate on the grounds of a person's gender, marital status, race, religion, colour, age, disability or sexual orientation. Every candidate will be assessed only in accordance with their merits, qualifications and ability to perform the duties of the job.

Job: Welders
Location: Thirsk, North Yorkshire
Duration: on-going contract, temp to perm or permanent contracts
Shifts: Days or Nights

We are currently recruiting for a number of Welders for positions based in Thirsk, North Yorkshire.

Our client is one of the largest and most successful steel-work contractors in the UK, they have recently won a large amount of work so are looking to extend their workforce.

The successful applicants will ideally have structural steel welding experience. You will be responsible for achieving high quality standards in a safe manner within the production time scales.

Dig allowance ( contractors only)
- 40 per shift accommodation allowance
- Must live over 50 miles from site to qualify (will require proof of address)
- Proof of accommodation will be required
- Allowance cannot be used for mileage

Shifts:
* Day Shifts - Monday to Thursday -6.30am to 4.30pm and Friday 6.30am to 12.30pm
* Nights - Monday to Thursday 7:10pm to 6:40am & OFF Fridays


Pay Rates (PAYE) :

Days - 18.89 ( 43'220.32 per annum)
Nights- 22.54 (51'571.52 per annum)

Overtime rates available.

Candidates must be prepared to go on site for a weld test.

The weld test will include 135 Mag Welding Process.
Test 1 - 8mm Single run Fillet Weld.
Test 2 - 10mm Multi run Fillet Weld.
Test 3 - Double bevel full Penetration Butt Weld.

All tests are carried out on 15mm thick plate in S355JR mild steel.

--- Fusion People are committed to promoting equal opportunities to people regardless of age, gender, religion, belief, race, sexuality or disability. We operate as an employment agency and employment business. You'll find a wide selection of vacancies on our website.

Job: Welders
Location: Thirsk, North Yorkshire
Duration: on-going contract, temp to perm or permanent contracts
Shifts: Days or Nights

We are currently recruiting for a number of Welders for positions based in Thirsk, North Yorkshire.

Our client is one of the largest and most successful steel-work contractors in the UK, they have recently won a large amount of work so are looking to extend their workforce.

The successful applicants will ideally have structural steel welding experience. You will be responsible for achieving high quality standards in a safe manner within the production time scales.

Dig allowance ( contractors only)
- 40 per shift accommodation allowance
- Must live over 50 miles from site to qualify (will require proof of address)
- Proof of accommodation will be required
- Allowance cannot be used for mileage

Shifts:
* Day Shifts - Monday to Thursday -6.30am to 4.30pm and Friday 6.30am to 12.30pm
* Nights - Monday to Thursday 7:10pm to 6:40am & OFF Fridays


Pay Rates (PAYE) :

Days - 18.89 ( 43'220.32 per annum)
Nights- 22.54 (51'571.52 per annum)

Overtime rates available.

Candidates must be prepared to go on site for a weld test.

The weld test will include 135 Mag Welding Process.
Test 1 - 8mm Single run Fillet Weld.
Test 2 - 10mm Multi run Fillet Weld.
Test 3 - Double bevel full Penetration Butt Weld.

All tests are carried out on 15mm thick plate in S355JR mild steel.

--- Fusion People are committed to promoting equal opportunities to people regardless of age, gender, religion, belief, race, sexuality or disability. We operate as an employment agency and employment business. You'll find a wide selection of vacancies on our website.

Job: Welders
Location: Thirsk, North Yorkshire
Duration: on-going contract, temp to perm or permanent contracts
Shifts: Days or Nights

We are currently recruiting for a number of Welders for positions based in Thirsk, North Yorkshire.

Our client is one of the largest and most successful steel-work contractors in the UK, they have recently won a large amount of work so are looking to extend their workforce.

The successful applicants will ideally have structural steel welding experience. You will be responsible for achieving high quality standards in a safe manner within the production time scales.

Dig allowance ( contractors only)
- 40 per shift accommodation allowance
- Must live over 50 miles from site to qualify (will require proof of address)
- Proof of accommodation will be required
- Allowance cannot be used for mileage

Shifts:
* Day Shifts - Monday to Thursday -6.30am to 4.30pm and Friday 6.30am to 12.30pm
* Nights - Monday to Thursday 7:10pm to 6:40am & OFF Fridays


Pay Rates (PAYE) :

Days - 18.89 ( 43'220.32 per annum)
Nights- 22.54 (51'571.52 per annum)

Overtime rates available.

Candidates must be prepared to go on site for a weld test.

The weld test will include 135 Mag Welding Process.
Test 1 - 8mm Single run Fillet Weld.
Test 2 - 10mm Multi run Fillet Weld.
Test 3 - Double bevel full Penetration Butt Weld.

All tests are carried out on 15mm thick plate in S355JR mild steel.

--- Fusion People are committed to promoting equal opportunities to people regardless of age, gender, religion, belief, race, sexuality or disability. We operate as an employment agency and employment business. You'll find a wide selection of vacancies on our website.

Our client is a provider of engineering services to a range of industry sectors including manufacturing and rail.This includes, welding and Inspection.

Due to an increase in workload they are currently looking for experienced Welders to be based in the East Midlands although the work could be nationwide on occasions.

The work will include carrying out repairs and modifications on a range of items including rail rolling stock.

Applicants must be experienced Welders with the ability to carry out MIG/MAG, TIG and Manual Metal Arc (Stick) or at least a combination of the above. A current coding would also be desirable. Previous experience of working with Aluminium and Stainless Steel is useful but not essential

Located in the East Midlands This is an excellent opportunity to join an extremely busy well respected organisation.

We are currently looking for an experienced Welder to work for one of our clients in Burton on Trent.

The client is a market-leading manufacturer of specialist equipment to a range of industry sectors including heavy engineering and aerospace.

Due to the specialist nature of the products the work is both interesting and varied and will involve the welding of large metal structures, working from engineering drawings, from base materials through to finished product. The work will mostly involve the welding of carbon steel and may involve some pipe work as well as plate.

The ideal candidates must be experienced MIG Welders The ability to weld to a high standard is essential. Previous experience of welding wide range of material thicknesses is required, and candidates will ideally have experience of multi-run welding.

A counterbalance fork lift truck licence would be desirable

This is an excellent opportunity to join a friendly well-established company with excellent future prospects for the right candidates.

Global Recruitment Services Ltd are a Recruitment Business based in the Midlands.

For more information and to apply please email your CV to us

We are currently looking for an experienced Welder to work for one of our clients in Burton on Trent.

The client is a market-leading manufacturer of specialist equipment to a range of industry sectors including heavy engineering and aerospace.

Due to the specialist nature of the products the work is both interesting and varied and will involve the welding of large metal structures, working from engineering drawings, from base materials through to finished product. The work will mostly involve the welding of carbon steel and may involve some pipe work as well as plate.

The ideal candidates must be experienced MIG Welders The ability to weld to a high standard is essential. Previous experience of welding wide range of material thicknesses is required, and candidates will ideally have experience of multi-run welding.

A counterbalance fork lift truck licence would be desirable

This is an excellent opportunity to join a friendly well-established company with excellent future prospects for the right candidates.

Global Recruitment Services Ltd are a Recruitment Business based in the Midlands.

For more information and to apply please email your CV to us

A long-established manufacturing company centrally located in Medway is seeking Welders on a temporary basis. There may be permanent opportunities available for the right candidates.

• Proficient in MAG/MIG and TIG welding
• Experience with stainless steel and/or carbon steel
• Candidates experienced only in stainless steel are still encouraged to apply
• Ability to read technical drawings (preferred but not mandatory)

Successful applicants will be required to:

• Complete a weld coding test
• Submit weld test samples as part of the interview process

Location: Medway (Centrally Based)

Hours: Monday-Thursday: 08:00-16:30 and Friday: 08:00-15:30

Berry Recruitment are currently looking for Welders in the Norwich and Fakenham area.

Your key responsibilities would be:

• Perform MIG and TIG welding on steel, stainless steel, and other materials
• Read and interpret technical drawings and fabrication diagram
• Carry out quality checks and ensure strong, clean welds
• Assist with fabrication and assembly tasks as needed

Requirements:

• Proven experience in MIG and TIG welding
• Ability to read and work from engineering drawings
• Knowledge of metal fabrication and workshop safety practices
• Welding qualifications or certifications (desirable)

Shift pattern: Monday-Friday 40 hours per week.

15.00 per hour during probation period.

This is a permanent position.

Please note that no terminology in this advert is intended to discriminate on the grounds of a person's gender, marital status, race, religion, colour, age, disability or sexual orientation. Every candidate will be assessed only in accordance with their merits, qualifications and ability to perform the duties of the job.