5,117 Cable Design jobs in the United Kingdom
Principal/Senior HV Cable Design Engineer - Energy | Expression of Interest
Manchester, North West
Stantec
Posted 17 days ago
Job Viewed
Job Description
Are you an experienced HV Cable Design Engineer looking for exciting new challenges? Enter our talent pool for future opportunities!
The transmission and distribution sector is rapidly transforming against a backdrop of growing demand, regulatory changes, ambitious carbon reduction targets and new innovations in technology.
Due to continued growth, we are open to speaking with experienced HV Cable Design Engineers for future opportunities.
We are open to exploring future opportunities in line with our growth across ideally Principal/Senior Engineer levels in our Energy Team. This team presents an exciting opportunity to get involved in a wide variety of projects, across various technical disciplines with clients across country. These projects can include HVDC, interconnectors, windfarms, substations, OHL, geotechnical solutions, building design, protection systems, LVAC, FEED, new builds, refurbishment works, connections schemes etc.
The role is to work as part of the Cable team on electrical substation design, major renewables, HVDC interconnectors, offshore grids, FEED design etc. You will be working closely with our other disciplines and supporting/leading. Ideally you will have experience in working with key T&D clients in the UK.
You will be joining a growing and collaborative team, working in partnership with a variety of clients to develop innovative and sustainable solutions to industry-wide efficiency and environmental challenges. We have ambitious growth plans and as a result there are lots of great development opportunities within our teams. This is an opportunity to play an important part in the U.K. energy transition.
See the below link for more information on our Energy sector teams:
Stantec Energy Transition - UK
**About You**
You will be a pro-active individual with knowledge and understanding of the electricity transmission and distribution industry. You will have the capability to coach and work within the wider energy team.
Ideally you will have a Bachelor's/Masters degree in Electrical Engineering (or related field), from an accredited institution and professional registration as a Chartered Engineer with the Engineering Council and ICE is preferred. You will also have experience as civil substation engineer, with a wider awareness of other typical HV civil engineering projects.
Ideally you will also have the following:-
+ You will have experience in the Design (Concept, FEED, and detail design) of transmission & distribution systems - for Utility companies based on International standards.
+ Ability to carry out inter- disciplinary coordination and work effectively with leads to resolve any design issues.
+ Application of broad practical knowledge to cable design & produces - Cable installation design including cable routing layouts, trench & trenchless section layouts, cable bonding & phasing, cable pulling, termination and jointing arrangements.
+ Hands on experience/working knowledge of CYMCAP software and perform cable sizing calculations based on international standards.
+ Capable of working under challenging workload subject to change at short notice.
+ Proficiency in MS Outlook, and MS Office (Excel, Word and PowerPoint)
+ Proficiency in AutoCAD or MicroStation.
#ukenergy #cbeng
#LI-ET1
**About Stantec**
The Stantec community unites more than 31,000 employees working in over 450 locations across 6 continents. We have been working with our clients and communities in the UK for over 150 years. We plan, design, deliver and manage the development and infrastructure needed to support the creation of sustainable, healthy, and prosperous communities.
Our teams provide effective and relevant solutions, translating our clients' vision into valued consents, deliverable plans for projects and programmes, and efficient designs for delivery, based on technical excellence and deep market insights. We deal with today's challenges, but also keep a fairer, better tomorrow in sight, looking at how we deliver clean growth, support radical changes in our economy and meet the needs of future communities.
Stantec provides equal employment opportunities to all qualified employees and applicants for future and current employment and prohibit discrimination on the grounds of race, colour, religion, sex, national origin, age, marital status, genetic information, disability, sexual orientation, gender identity or gender expression. We prohibit discrimination in decisions concerning recruitment, hiring, referral, promotion, compensation, fringe benefits, job training, terminations, or any other condition of employment. Stantec is in compliance with laws and regulations and ensures equitable opportunities in all aspects of employment.
For more information on Stantec UK Inclusion & Diversity approach please got to:
Inclusion & Diversity (stantec.com)
**ReqID:** 6319
The transmission and distribution sector is rapidly transforming against a backdrop of growing demand, regulatory changes, ambitious carbon reduction targets and new innovations in technology.
Due to continued growth, we are open to speaking with experienced HV Cable Design Engineers for future opportunities.
We are open to exploring future opportunities in line with our growth across ideally Principal/Senior Engineer levels in our Energy Team. This team presents an exciting opportunity to get involved in a wide variety of projects, across various technical disciplines with clients across country. These projects can include HVDC, interconnectors, windfarms, substations, OHL, geotechnical solutions, building design, protection systems, LVAC, FEED, new builds, refurbishment works, connections schemes etc.
The role is to work as part of the Cable team on electrical substation design, major renewables, HVDC interconnectors, offshore grids, FEED design etc. You will be working closely with our other disciplines and supporting/leading. Ideally you will have experience in working with key T&D clients in the UK.
You will be joining a growing and collaborative team, working in partnership with a variety of clients to develop innovative and sustainable solutions to industry-wide efficiency and environmental challenges. We have ambitious growth plans and as a result there are lots of great development opportunities within our teams. This is an opportunity to play an important part in the U.K. energy transition.
See the below link for more information on our Energy sector teams:
Stantec Energy Transition - UK
**About You**
You will be a pro-active individual with knowledge and understanding of the electricity transmission and distribution industry. You will have the capability to coach and work within the wider energy team.
Ideally you will have a Bachelor's/Masters degree in Electrical Engineering (or related field), from an accredited institution and professional registration as a Chartered Engineer with the Engineering Council and ICE is preferred. You will also have experience as civil substation engineer, with a wider awareness of other typical HV civil engineering projects.
Ideally you will also have the following:-
+ You will have experience in the Design (Concept, FEED, and detail design) of transmission & distribution systems - for Utility companies based on International standards.
+ Ability to carry out inter- disciplinary coordination and work effectively with leads to resolve any design issues.
+ Application of broad practical knowledge to cable design & produces - Cable installation design including cable routing layouts, trench & trenchless section layouts, cable bonding & phasing, cable pulling, termination and jointing arrangements.
+ Hands on experience/working knowledge of CYMCAP software and perform cable sizing calculations based on international standards.
+ Capable of working under challenging workload subject to change at short notice.
+ Proficiency in MS Outlook, and MS Office (Excel, Word and PowerPoint)
+ Proficiency in AutoCAD or MicroStation.
#ukenergy #cbeng
#LI-ET1
**About Stantec**
The Stantec community unites more than 31,000 employees working in over 450 locations across 6 continents. We have been working with our clients and communities in the UK for over 150 years. We plan, design, deliver and manage the development and infrastructure needed to support the creation of sustainable, healthy, and prosperous communities.
Our teams provide effective and relevant solutions, translating our clients' vision into valued consents, deliverable plans for projects and programmes, and efficient designs for delivery, based on technical excellence and deep market insights. We deal with today's challenges, but also keep a fairer, better tomorrow in sight, looking at how we deliver clean growth, support radical changes in our economy and meet the needs of future communities.
Stantec provides equal employment opportunities to all qualified employees and applicants for future and current employment and prohibit discrimination on the grounds of race, colour, religion, sex, national origin, age, marital status, genetic information, disability, sexual orientation, gender identity or gender expression. We prohibit discrimination in decisions concerning recruitment, hiring, referral, promotion, compensation, fringe benefits, job training, terminations, or any other condition of employment. Stantec is in compliance with laws and regulations and ensures equitable opportunities in all aspects of employment.
For more information on Stantec UK Inclusion & Diversity approach please got to:
Inclusion & Diversity (stantec.com)
**ReqID:** 6319
This advertiser has chosen not to accept applicants from your region.
0
Principal/Senior HV Cable Design Engineer - Energy | Expression of Interest
Edinburgh, Scotland
Stantec
Posted 17 days ago
Job Viewed
Job Description
Are you an experienced HV Cable Design Engineer looking for exciting new challenges? Enter our talent pool for future opportunities!
The transmission and distribution sector is rapidly transforming against a backdrop of growing demand, regulatory changes, ambitious carbon reduction targets and new innovations in technology.
Due to continued growth, we are open to speaking with experienced HV Cable Design Engineers for future opportunities.
We are open to exploring future opportunities in line with our growth across ideally Principal/Senior Engineer levels in our Energy Team. This team presents an exciting opportunity to get involved in a wide variety of projects, across various technical disciplines with clients across country. These projects can include HVDC, interconnectors, windfarms, substations, OHL, geotechnical solutions, building design, protection systems, LVAC, FEED, new builds, refurbishment works, connections schemes etc.
The role is to work as part of the Cable team on electrical substation design, major renewables, HVDC interconnectors, offshore grids, FEED design etc. You will be working closely with our other disciplines and supporting/leading. Ideally you will have experience in working with key T&D clients in the UK.
You will be joining a growing and collaborative team, working in partnership with a variety of clients to develop innovative and sustainable solutions to industry-wide efficiency and environmental challenges. We have ambitious growth plans and as a result there are lots of great development opportunities within our teams. This is an opportunity to play an important part in the U.K. energy transition.
See the below link for more information on our Energy sector teams:
Stantec Energy Transition - UK
**About You**
You will be a pro-active individual with knowledge and understanding of the electricity transmission and distribution industry. You will have the capability to coach and work within the wider energy team.
Ideally you will have a Bachelor's/Masters degree in Electrical Engineering (or related field), from an accredited institution and professional registration as a Chartered Engineer with the Engineering Council and ICE is preferred. You will also have experience as civil substation engineer, with a wider awareness of other typical HV civil engineering projects.
Ideally you will also have the following:-
+ You will have experience in the Design (Concept, FEED, and detail design) of transmission & distribution systems - for Utility companies based on International standards.
+ Ability to carry out inter- disciplinary coordination and work effectively with leads to resolve any design issues.
+ Application of broad practical knowledge to cable design & produces - Cable installation design including cable routing layouts, trench & trenchless section layouts, cable bonding & phasing, cable pulling, termination and jointing arrangements.
+ Hands on experience/working knowledge of CYMCAP software and perform cable sizing calculations based on international standards.
+ Capable of working under challenging workload subject to change at short notice.
+ Proficiency in MS Outlook, and MS Office (Excel, Word and PowerPoint)
+ Proficiency in AutoCAD or MicroStation.
#ukenergy #cbeng
#LI-ET1
**About Stantec**
The Stantec community unites more than 31,000 employees working in over 450 locations across 6 continents. We have been working with our clients and communities in the UK for over 150 years. We plan, design, deliver and manage the development and infrastructure needed to support the creation of sustainable, healthy, and prosperous communities.
Our teams provide effective and relevant solutions, translating our clients' vision into valued consents, deliverable plans for projects and programmes, and efficient designs for delivery, based on technical excellence and deep market insights. We deal with today's challenges, but also keep a fairer, better tomorrow in sight, looking at how we deliver clean growth, support radical changes in our economy and meet the needs of future communities.
Stantec provides equal employment opportunities to all qualified employees and applicants for future and current employment and prohibit discrimination on the grounds of race, colour, religion, sex, national origin, age, marital status, genetic information, disability, sexual orientation, gender identity or gender expression. We prohibit discrimination in decisions concerning recruitment, hiring, referral, promotion, compensation, fringe benefits, job training, terminations, or any other condition of employment. Stantec is in compliance with laws and regulations and ensures equitable opportunities in all aspects of employment.
For more information on Stantec UK Inclusion & Diversity approach please got to:
Inclusion & Diversity (stantec.com)
**ReqID:** 6319
The transmission and distribution sector is rapidly transforming against a backdrop of growing demand, regulatory changes, ambitious carbon reduction targets and new innovations in technology.
Due to continued growth, we are open to speaking with experienced HV Cable Design Engineers for future opportunities.
We are open to exploring future opportunities in line with our growth across ideally Principal/Senior Engineer levels in our Energy Team. This team presents an exciting opportunity to get involved in a wide variety of projects, across various technical disciplines with clients across country. These projects can include HVDC, interconnectors, windfarms, substations, OHL, geotechnical solutions, building design, protection systems, LVAC, FEED, new builds, refurbishment works, connections schemes etc.
The role is to work as part of the Cable team on electrical substation design, major renewables, HVDC interconnectors, offshore grids, FEED design etc. You will be working closely with our other disciplines and supporting/leading. Ideally you will have experience in working with key T&D clients in the UK.
You will be joining a growing and collaborative team, working in partnership with a variety of clients to develop innovative and sustainable solutions to industry-wide efficiency and environmental challenges. We have ambitious growth plans and as a result there are lots of great development opportunities within our teams. This is an opportunity to play an important part in the U.K. energy transition.
See the below link for more information on our Energy sector teams:
Stantec Energy Transition - UK
**About You**
You will be a pro-active individual with knowledge and understanding of the electricity transmission and distribution industry. You will have the capability to coach and work within the wider energy team.
Ideally you will have a Bachelor's/Masters degree in Electrical Engineering (or related field), from an accredited institution and professional registration as a Chartered Engineer with the Engineering Council and ICE is preferred. You will also have experience as civil substation engineer, with a wider awareness of other typical HV civil engineering projects.
Ideally you will also have the following:-
+ You will have experience in the Design (Concept, FEED, and detail design) of transmission & distribution systems - for Utility companies based on International standards.
+ Ability to carry out inter- disciplinary coordination and work effectively with leads to resolve any design issues.
+ Application of broad practical knowledge to cable design & produces - Cable installation design including cable routing layouts, trench & trenchless section layouts, cable bonding & phasing, cable pulling, termination and jointing arrangements.
+ Hands on experience/working knowledge of CYMCAP software and perform cable sizing calculations based on international standards.
+ Capable of working under challenging workload subject to change at short notice.
+ Proficiency in MS Outlook, and MS Office (Excel, Word and PowerPoint)
+ Proficiency in AutoCAD or MicroStation.
#ukenergy #cbeng
#LI-ET1
**About Stantec**
The Stantec community unites more than 31,000 employees working in over 450 locations across 6 continents. We have been working with our clients and communities in the UK for over 150 years. We plan, design, deliver and manage the development and infrastructure needed to support the creation of sustainable, healthy, and prosperous communities.
Our teams provide effective and relevant solutions, translating our clients' vision into valued consents, deliverable plans for projects and programmes, and efficient designs for delivery, based on technical excellence and deep market insights. We deal with today's challenges, but also keep a fairer, better tomorrow in sight, looking at how we deliver clean growth, support radical changes in our economy and meet the needs of future communities.
Stantec provides equal employment opportunities to all qualified employees and applicants for future and current employment and prohibit discrimination on the grounds of race, colour, religion, sex, national origin, age, marital status, genetic information, disability, sexual orientation, gender identity or gender expression. We prohibit discrimination in decisions concerning recruitment, hiring, referral, promotion, compensation, fringe benefits, job training, terminations, or any other condition of employment. Stantec is in compliance with laws and regulations and ensures equitable opportunities in all aspects of employment.
For more information on Stantec UK Inclusion & Diversity approach please got to:
Inclusion & Diversity (stantec.com)
**ReqID:** 6319
This advertiser has chosen not to accept applicants from your region.
1
Principal/Senior HV Cable Design Engineer - Energy | Expression of Interest
Stantec
Posted 17 days ago
Job Viewed
Job Description
Are you an experienced HV Cable Design Engineer looking for exciting new challenges? Enter our talent pool for future opportunities!
The transmission and distribution sector is rapidly transforming against a backdrop of growing demand, regulatory changes, ambitious carbon reduction targets and new innovations in technology.
Due to continued growth, we are open to speaking with experienced HV Cable Design Engineers for future opportunities.
We are open to exploring future opportunities in line with our growth across ideally Principal/Senior Engineer levels in our Energy Team. This team presents an exciting opportunity to get involved in a wide variety of projects, across various technical disciplines with clients across country. These projects can include HVDC, interconnectors, windfarms, substations, OHL, geotechnical solutions, building design, protection systems, LVAC, FEED, new builds, refurbishment works, connections schemes etc.
The role is to work as part of the Cable team on electrical substation design, major renewables, HVDC interconnectors, offshore grids, FEED design etc. You will be working closely with our other disciplines and supporting/leading. Ideally you will have experience in working with key T&D clients in the UK.
You will be joining a growing and collaborative team, working in partnership with a variety of clients to develop innovative and sustainable solutions to industry-wide efficiency and environmental challenges. We have ambitious growth plans and as a result there are lots of great development opportunities within our teams. This is an opportunity to play an important part in the U.K. energy transition.
See the below link for more information on our Energy sector teams:
Stantec Energy Transition - UK
**About You**
You will be a pro-active individual with knowledge and understanding of the electricity transmission and distribution industry. You will have the capability to coach and work within the wider energy team.
Ideally you will have a Bachelor's/Masters degree in Electrical Engineering (or related field), from an accredited institution and professional registration as a Chartered Engineer with the Engineering Council and ICE is preferred. You will also have experience as civil substation engineer, with a wider awareness of other typical HV civil engineering projects.
Ideally you will also have the following:-
+ You will have experience in the Design (Concept, FEED, and detail design) of transmission & distribution systems - for Utility companies based on International standards.
+ Ability to carry out inter- disciplinary coordination and work effectively with leads to resolve any design issues.
+ Application of broad practical knowledge to cable design & produces - Cable installation design including cable routing layouts, trench & trenchless section layouts, cable bonding & phasing, cable pulling, termination and jointing arrangements.
+ Hands on experience/working knowledge of CYMCAP software and perform cable sizing calculations based on international standards.
+ Capable of working under challenging workload subject to change at short notice.
+ Proficiency in MS Outlook, and MS Office (Excel, Word and PowerPoint)
+ Proficiency in AutoCAD or MicroStation.
#ukenergy #cbeng
#LI-ET1
**About Stantec**
The Stantec community unites more than 31,000 employees working in over 450 locations across 6 continents. We have been working with our clients and communities in the UK for over 150 years. We plan, design, deliver and manage the development and infrastructure needed to support the creation of sustainable, healthy, and prosperous communities.
Our teams provide effective and relevant solutions, translating our clients' vision into valued consents, deliverable plans for projects and programmes, and efficient designs for delivery, based on technical excellence and deep market insights. We deal with today's challenges, but also keep a fairer, better tomorrow in sight, looking at how we deliver clean growth, support radical changes in our economy and meet the needs of future communities.
Stantec provides equal employment opportunities to all qualified employees and applicants for future and current employment and prohibit discrimination on the grounds of race, colour, religion, sex, national origin, age, marital status, genetic information, disability, sexual orientation, gender identity or gender expression. We prohibit discrimination in decisions concerning recruitment, hiring, referral, promotion, compensation, fringe benefits, job training, terminations, or any other condition of employment. Stantec is in compliance with laws and regulations and ensures equitable opportunities in all aspects of employment.
For more information on Stantec UK Inclusion & Diversity approach please got to:
Inclusion & Diversity (stantec.com)
**ReqID:** 6319
The transmission and distribution sector is rapidly transforming against a backdrop of growing demand, regulatory changes, ambitious carbon reduction targets and new innovations in technology.
Due to continued growth, we are open to speaking with experienced HV Cable Design Engineers for future opportunities.
We are open to exploring future opportunities in line with our growth across ideally Principal/Senior Engineer levels in our Energy Team. This team presents an exciting opportunity to get involved in a wide variety of projects, across various technical disciplines with clients across country. These projects can include HVDC, interconnectors, windfarms, substations, OHL, geotechnical solutions, building design, protection systems, LVAC, FEED, new builds, refurbishment works, connections schemes etc.
The role is to work as part of the Cable team on electrical substation design, major renewables, HVDC interconnectors, offshore grids, FEED design etc. You will be working closely with our other disciplines and supporting/leading. Ideally you will have experience in working with key T&D clients in the UK.
You will be joining a growing and collaborative team, working in partnership with a variety of clients to develop innovative and sustainable solutions to industry-wide efficiency and environmental challenges. We have ambitious growth plans and as a result there are lots of great development opportunities within our teams. This is an opportunity to play an important part in the U.K. energy transition.
See the below link for more information on our Energy sector teams:
Stantec Energy Transition - UK
**About You**
You will be a pro-active individual with knowledge and understanding of the electricity transmission and distribution industry. You will have the capability to coach and work within the wider energy team.
Ideally you will have a Bachelor's/Masters degree in Electrical Engineering (or related field), from an accredited institution and professional registration as a Chartered Engineer with the Engineering Council and ICE is preferred. You will also have experience as civil substation engineer, with a wider awareness of other typical HV civil engineering projects.
Ideally you will also have the following:-
+ You will have experience in the Design (Concept, FEED, and detail design) of transmission & distribution systems - for Utility companies based on International standards.
+ Ability to carry out inter- disciplinary coordination and work effectively with leads to resolve any design issues.
+ Application of broad practical knowledge to cable design & produces - Cable installation design including cable routing layouts, trench & trenchless section layouts, cable bonding & phasing, cable pulling, termination and jointing arrangements.
+ Hands on experience/working knowledge of CYMCAP software and perform cable sizing calculations based on international standards.
+ Capable of working under challenging workload subject to change at short notice.
+ Proficiency in MS Outlook, and MS Office (Excel, Word and PowerPoint)
+ Proficiency in AutoCAD or MicroStation.
#ukenergy #cbeng
#LI-ET1
**About Stantec**
The Stantec community unites more than 31,000 employees working in over 450 locations across 6 continents. We have been working with our clients and communities in the UK for over 150 years. We plan, design, deliver and manage the development and infrastructure needed to support the creation of sustainable, healthy, and prosperous communities.
Our teams provide effective and relevant solutions, translating our clients' vision into valued consents, deliverable plans for projects and programmes, and efficient designs for delivery, based on technical excellence and deep market insights. We deal with today's challenges, but also keep a fairer, better tomorrow in sight, looking at how we deliver clean growth, support radical changes in our economy and meet the needs of future communities.
Stantec provides equal employment opportunities to all qualified employees and applicants for future and current employment and prohibit discrimination on the grounds of race, colour, religion, sex, national origin, age, marital status, genetic information, disability, sexual orientation, gender identity or gender expression. We prohibit discrimination in decisions concerning recruitment, hiring, referral, promotion, compensation, fringe benefits, job training, terminations, or any other condition of employment. Stantec is in compliance with laws and regulations and ensures equitable opportunities in all aspects of employment.
For more information on Stantec UK Inclusion & Diversity approach please got to:
Inclusion & Diversity (stantec.com)
**ReqID:** 6319
This advertiser has chosen not to accept applicants from your region.
2
Principal/Senior HV Cable Design Engineer - Energy | Expression of Interest
London, London
Stantec
Posted 17 days ago
Job Viewed
Job Description
Are you an experienced HV Cable Design Engineer looking for exciting new challenges? Enter our talent pool for future opportunities!
The transmission and distribution sector is rapidly transforming against a backdrop of growing demand, regulatory changes, ambitious carbon reduction targets and new innovations in technology.
Due to continued growth, we are open to speaking with experienced HV Cable Design Engineers for future opportunities.
We are open to exploring future opportunities in line with our growth across ideally Principal/Senior Engineer levels in our Energy Team. This team presents an exciting opportunity to get involved in a wide variety of projects, across various technical disciplines with clients across country. These projects can include HVDC, interconnectors, windfarms, substations, OHL, geotechnical solutions, building design, protection systems, LVAC, FEED, new builds, refurbishment works, connections schemes etc.
The role is to work as part of the Cable team on electrical substation design, major renewables, HVDC interconnectors, offshore grids, FEED design etc. You will be working closely with our other disciplines and supporting/leading. Ideally you will have experience in working with key T&D clients in the UK.
You will be joining a growing and collaborative team, working in partnership with a variety of clients to develop innovative and sustainable solutions to industry-wide efficiency and environmental challenges. We have ambitious growth plans and as a result there are lots of great development opportunities within our teams. This is an opportunity to play an important part in the U.K. energy transition.
See the below link for more information on our Energy sector teams:
Stantec Energy Transition - UK
**About You**
You will be a pro-active individual with knowledge and understanding of the electricity transmission and distribution industry. You will have the capability to coach and work within the wider energy team.
Ideally you will have a Bachelor's/Masters degree in Electrical Engineering (or related field), from an accredited institution and professional registration as a Chartered Engineer with the Engineering Council and ICE is preferred. You will also have experience as civil substation engineer, with a wider awareness of other typical HV civil engineering projects.
Ideally you will also have the following:-
+ You will have experience in the Design (Concept, FEED, and detail design) of transmission & distribution systems - for Utility companies based on International standards.
+ Ability to carry out inter- disciplinary coordination and work effectively with leads to resolve any design issues.
+ Application of broad practical knowledge to cable design & produces - Cable installation design including cable routing layouts, trench & trenchless section layouts, cable bonding & phasing, cable pulling, termination and jointing arrangements.
+ Hands on experience/working knowledge of CYMCAP software and perform cable sizing calculations based on international standards.
+ Capable of working under challenging workload subject to change at short notice.
+ Proficiency in MS Outlook, and MS Office (Excel, Word and PowerPoint)
+ Proficiency in AutoCAD or MicroStation.
#ukenergy #cbeng
#LI-ET1
**About Stantec**
The Stantec community unites more than 31,000 employees working in over 450 locations across 6 continents. We have been working with our clients and communities in the UK for over 150 years. We plan, design, deliver and manage the development and infrastructure needed to support the creation of sustainable, healthy, and prosperous communities.
Our teams provide effective and relevant solutions, translating our clients' vision into valued consents, deliverable plans for projects and programmes, and efficient designs for delivery, based on technical excellence and deep market insights. We deal with today's challenges, but also keep a fairer, better tomorrow in sight, looking at how we deliver clean growth, support radical changes in our economy and meet the needs of future communities.
Stantec provides equal employment opportunities to all qualified employees and applicants for future and current employment and prohibit discrimination on the grounds of race, colour, religion, sex, national origin, age, marital status, genetic information, disability, sexual orientation, gender identity or gender expression. We prohibit discrimination in decisions concerning recruitment, hiring, referral, promotion, compensation, fringe benefits, job training, terminations, or any other condition of employment. Stantec is in compliance with laws and regulations and ensures equitable opportunities in all aspects of employment.
For more information on Stantec UK Inclusion & Diversity approach please got to:
Inclusion & Diversity (stantec.com)
**ReqID:** 6319
The transmission and distribution sector is rapidly transforming against a backdrop of growing demand, regulatory changes, ambitious carbon reduction targets and new innovations in technology.
Due to continued growth, we are open to speaking with experienced HV Cable Design Engineers for future opportunities.
We are open to exploring future opportunities in line with our growth across ideally Principal/Senior Engineer levels in our Energy Team. This team presents an exciting opportunity to get involved in a wide variety of projects, across various technical disciplines with clients across country. These projects can include HVDC, interconnectors, windfarms, substations, OHL, geotechnical solutions, building design, protection systems, LVAC, FEED, new builds, refurbishment works, connections schemes etc.
The role is to work as part of the Cable team on electrical substation design, major renewables, HVDC interconnectors, offshore grids, FEED design etc. You will be working closely with our other disciplines and supporting/leading. Ideally you will have experience in working with key T&D clients in the UK.
You will be joining a growing and collaborative team, working in partnership with a variety of clients to develop innovative and sustainable solutions to industry-wide efficiency and environmental challenges. We have ambitious growth plans and as a result there are lots of great development opportunities within our teams. This is an opportunity to play an important part in the U.K. energy transition.
See the below link for more information on our Energy sector teams:
Stantec Energy Transition - UK
**About You**
You will be a pro-active individual with knowledge and understanding of the electricity transmission and distribution industry. You will have the capability to coach and work within the wider energy team.
Ideally you will have a Bachelor's/Masters degree in Electrical Engineering (or related field), from an accredited institution and professional registration as a Chartered Engineer with the Engineering Council and ICE is preferred. You will also have experience as civil substation engineer, with a wider awareness of other typical HV civil engineering projects.
Ideally you will also have the following:-
+ You will have experience in the Design (Concept, FEED, and detail design) of transmission & distribution systems - for Utility companies based on International standards.
+ Ability to carry out inter- disciplinary coordination and work effectively with leads to resolve any design issues.
+ Application of broad practical knowledge to cable design & produces - Cable installation design including cable routing layouts, trench & trenchless section layouts, cable bonding & phasing, cable pulling, termination and jointing arrangements.
+ Hands on experience/working knowledge of CYMCAP software and perform cable sizing calculations based on international standards.
+ Capable of working under challenging workload subject to change at short notice.
+ Proficiency in MS Outlook, and MS Office (Excel, Word and PowerPoint)
+ Proficiency in AutoCAD or MicroStation.
#ukenergy #cbeng
#LI-ET1
**About Stantec**
The Stantec community unites more than 31,000 employees working in over 450 locations across 6 continents. We have been working with our clients and communities in the UK for over 150 years. We plan, design, deliver and manage the development and infrastructure needed to support the creation of sustainable, healthy, and prosperous communities.
Our teams provide effective and relevant solutions, translating our clients' vision into valued consents, deliverable plans for projects and programmes, and efficient designs for delivery, based on technical excellence and deep market insights. We deal with today's challenges, but also keep a fairer, better tomorrow in sight, looking at how we deliver clean growth, support radical changes in our economy and meet the needs of future communities.
Stantec provides equal employment opportunities to all qualified employees and applicants for future and current employment and prohibit discrimination on the grounds of race, colour, religion, sex, national origin, age, marital status, genetic information, disability, sexual orientation, gender identity or gender expression. We prohibit discrimination in decisions concerning recruitment, hiring, referral, promotion, compensation, fringe benefits, job training, terminations, or any other condition of employment. Stantec is in compliance with laws and regulations and ensures equitable opportunities in all aspects of employment.
For more information on Stantec UK Inclusion & Diversity approach please got to:
Inclusion & Diversity (stantec.com)
**ReqID:** 6319
This advertiser has chosen not to accept applicants from your region.
3
Principal/Senior HV Cable Design Engineer - Energy | Expression of Interest
Glasgow, Scotland
Stantec
Posted 17 days ago
Job Viewed
Job Description
Are you an experienced HV Cable Design Engineer looking for exciting new challenges? Enter our talent pool for future opportunities!
The transmission and distribution sector is rapidly transforming against a backdrop of growing demand, regulatory changes, ambitious carbon reduction targets and new innovations in technology.
Due to continued growth, we are open to speaking with experienced HV Cable Design Engineers for future opportunities.
We are open to exploring future opportunities in line with our growth across ideally Principal/Senior Engineer levels in our Energy Team. This team presents an exciting opportunity to get involved in a wide variety of projects, across various technical disciplines with clients across country. These projects can include HVDC, interconnectors, windfarms, substations, OHL, geotechnical solutions, building design, protection systems, LVAC, FEED, new builds, refurbishment works, connections schemes etc.
The role is to work as part of the Cable team on electrical substation design, major renewables, HVDC interconnectors, offshore grids, FEED design etc. You will be working closely with our other disciplines and supporting/leading. Ideally you will have experience in working with key T&D clients in the UK.
You will be joining a growing and collaborative team, working in partnership with a variety of clients to develop innovative and sustainable solutions to industry-wide efficiency and environmental challenges. We have ambitious growth plans and as a result there are lots of great development opportunities within our teams. This is an opportunity to play an important part in the U.K. energy transition.
See the below link for more information on our Energy sector teams:
Stantec Energy Transition - UK
**About You**
You will be a pro-active individual with knowledge and understanding of the electricity transmission and distribution industry. You will have the capability to coach and work within the wider energy team.
Ideally you will have a Bachelor's/Masters degree in Electrical Engineering (or related field), from an accredited institution and professional registration as a Chartered Engineer with the Engineering Council and ICE is preferred. You will also have experience as civil substation engineer, with a wider awareness of other typical HV civil engineering projects.
Ideally you will also have the following:-
+ You will have experience in the Design (Concept, FEED, and detail design) of transmission & distribution systems - for Utility companies based on International standards.
+ Ability to carry out inter- disciplinary coordination and work effectively with leads to resolve any design issues.
+ Application of broad practical knowledge to cable design & produces - Cable installation design including cable routing layouts, trench & trenchless section layouts, cable bonding & phasing, cable pulling, termination and jointing arrangements.
+ Hands on experience/working knowledge of CYMCAP software and perform cable sizing calculations based on international standards.
+ Capable of working under challenging workload subject to change at short notice.
+ Proficiency in MS Outlook, and MS Office (Excel, Word and PowerPoint)
+ Proficiency in AutoCAD or MicroStation.
#ukenergy #cbeng
#LI-ET1
**About Stantec**
The Stantec community unites more than 31,000 employees working in over 450 locations across 6 continents. We have been working with our clients and communities in the UK for over 150 years. We plan, design, deliver and manage the development and infrastructure needed to support the creation of sustainable, healthy, and prosperous communities.
Our teams provide effective and relevant solutions, translating our clients' vision into valued consents, deliverable plans for projects and programmes, and efficient designs for delivery, based on technical excellence and deep market insights. We deal with today's challenges, but also keep a fairer, better tomorrow in sight, looking at how we deliver clean growth, support radical changes in our economy and meet the needs of future communities.
Stantec provides equal employment opportunities to all qualified employees and applicants for future and current employment and prohibit discrimination on the grounds of race, colour, religion, sex, national origin, age, marital status, genetic information, disability, sexual orientation, gender identity or gender expression. We prohibit discrimination in decisions concerning recruitment, hiring, referral, promotion, compensation, fringe benefits, job training, terminations, or any other condition of employment. Stantec is in compliance with laws and regulations and ensures equitable opportunities in all aspects of employment.
For more information on Stantec UK Inclusion & Diversity approach please got to:
Inclusion & Diversity (stantec.com)
**ReqID:** 6319
The transmission and distribution sector is rapidly transforming against a backdrop of growing demand, regulatory changes, ambitious carbon reduction targets and new innovations in technology.
Due to continued growth, we are open to speaking with experienced HV Cable Design Engineers for future opportunities.
We are open to exploring future opportunities in line with our growth across ideally Principal/Senior Engineer levels in our Energy Team. This team presents an exciting opportunity to get involved in a wide variety of projects, across various technical disciplines with clients across country. These projects can include HVDC, interconnectors, windfarms, substations, OHL, geotechnical solutions, building design, protection systems, LVAC, FEED, new builds, refurbishment works, connections schemes etc.
The role is to work as part of the Cable team on electrical substation design, major renewables, HVDC interconnectors, offshore grids, FEED design etc. You will be working closely with our other disciplines and supporting/leading. Ideally you will have experience in working with key T&D clients in the UK.
You will be joining a growing and collaborative team, working in partnership with a variety of clients to develop innovative and sustainable solutions to industry-wide efficiency and environmental challenges. We have ambitious growth plans and as a result there are lots of great development opportunities within our teams. This is an opportunity to play an important part in the U.K. energy transition.
See the below link for more information on our Energy sector teams:
Stantec Energy Transition - UK
**About You**
You will be a pro-active individual with knowledge and understanding of the electricity transmission and distribution industry. You will have the capability to coach and work within the wider energy team.
Ideally you will have a Bachelor's/Masters degree in Electrical Engineering (or related field), from an accredited institution and professional registration as a Chartered Engineer with the Engineering Council and ICE is preferred. You will also have experience as civil substation engineer, with a wider awareness of other typical HV civil engineering projects.
Ideally you will also have the following:-
+ You will have experience in the Design (Concept, FEED, and detail design) of transmission & distribution systems - for Utility companies based on International standards.
+ Ability to carry out inter- disciplinary coordination and work effectively with leads to resolve any design issues.
+ Application of broad practical knowledge to cable design & produces - Cable installation design including cable routing layouts, trench & trenchless section layouts, cable bonding & phasing, cable pulling, termination and jointing arrangements.
+ Hands on experience/working knowledge of CYMCAP software and perform cable sizing calculations based on international standards.
+ Capable of working under challenging workload subject to change at short notice.
+ Proficiency in MS Outlook, and MS Office (Excel, Word and PowerPoint)
+ Proficiency in AutoCAD or MicroStation.
#ukenergy #cbeng
#LI-ET1
**About Stantec**
The Stantec community unites more than 31,000 employees working in over 450 locations across 6 continents. We have been working with our clients and communities in the UK for over 150 years. We plan, design, deliver and manage the development and infrastructure needed to support the creation of sustainable, healthy, and prosperous communities.
Our teams provide effective and relevant solutions, translating our clients' vision into valued consents, deliverable plans for projects and programmes, and efficient designs for delivery, based on technical excellence and deep market insights. We deal with today's challenges, but also keep a fairer, better tomorrow in sight, looking at how we deliver clean growth, support radical changes in our economy and meet the needs of future communities.
Stantec provides equal employment opportunities to all qualified employees and applicants for future and current employment and prohibit discrimination on the grounds of race, colour, religion, sex, national origin, age, marital status, genetic information, disability, sexual orientation, gender identity or gender expression. We prohibit discrimination in decisions concerning recruitment, hiring, referral, promotion, compensation, fringe benefits, job training, terminations, or any other condition of employment. Stantec is in compliance with laws and regulations and ensures equitable opportunities in all aspects of employment.
For more information on Stantec UK Inclusion & Diversity approach please got to:
Inclusion & Diversity (stantec.com)
**ReqID:** 6319
This advertiser has chosen not to accept applicants from your region.
4
Principal/Senior HV Cable Design Engineer - Energy | Expression of Interest
Warrington, North West
Stantec
Posted 17 days ago
Job Viewed
Job Description
Are you an experienced HV Cable Design Engineer looking for exciting new challenges? Enter our talent pool for future opportunities!
The transmission and distribution sector is rapidly transforming against a backdrop of growing demand, regulatory changes, ambitious carbon reduction targets and new innovations in technology.
Due to continued growth, we are open to speaking with experienced HV Cable Design Engineers for future opportunities.
We are open to exploring future opportunities in line with our growth across ideally Principal/Senior Engineer levels in our Energy Team. This team presents an exciting opportunity to get involved in a wide variety of projects, across various technical disciplines with clients across country. These projects can include HVDC, interconnectors, windfarms, substations, OHL, geotechnical solutions, building design, protection systems, LVAC, FEED, new builds, refurbishment works, connections schemes etc.
The role is to work as part of the Cable team on electrical substation design, major renewables, HVDC interconnectors, offshore grids, FEED design etc. You will be working closely with our other disciplines and supporting/leading. Ideally you will have experience in working with key T&D clients in the UK.
You will be joining a growing and collaborative team, working in partnership with a variety of clients to develop innovative and sustainable solutions to industry-wide efficiency and environmental challenges. We have ambitious growth plans and as a result there are lots of great development opportunities within our teams. This is an opportunity to play an important part in the U.K. energy transition.
See the below link for more information on our Energy sector teams:
Stantec Energy Transition - UK
**About You**
You will be a pro-active individual with knowledge and understanding of the electricity transmission and distribution industry. You will have the capability to coach and work within the wider energy team.
Ideally you will have a Bachelor's/Masters degree in Electrical Engineering (or related field), from an accredited institution and professional registration as a Chartered Engineer with the Engineering Council and ICE is preferred. You will also have experience as civil substation engineer, with a wider awareness of other typical HV civil engineering projects.
Ideally you will also have the following:-
+ You will have experience in the Design (Concept, FEED, and detail design) of transmission & distribution systems - for Utility companies based on International standards.
+ Ability to carry out inter- disciplinary coordination and work effectively with leads to resolve any design issues.
+ Application of broad practical knowledge to cable design & produces - Cable installation design including cable routing layouts, trench & trenchless section layouts, cable bonding & phasing, cable pulling, termination and jointing arrangements.
+ Hands on experience/working knowledge of CYMCAP software and perform cable sizing calculations based on international standards.
+ Capable of working under challenging workload subject to change at short notice.
+ Proficiency in MS Outlook, and MS Office (Excel, Word and PowerPoint)
+ Proficiency in AutoCAD or MicroStation.
#ukenergy #cbeng
#LI-ET1
**About Stantec**
The Stantec community unites more than 31,000 employees working in over 450 locations across 6 continents. We have been working with our clients and communities in the UK for over 150 years. We plan, design, deliver and manage the development and infrastructure needed to support the creation of sustainable, healthy, and prosperous communities.
Our teams provide effective and relevant solutions, translating our clients' vision into valued consents, deliverable plans for projects and programmes, and efficient designs for delivery, based on technical excellence and deep market insights. We deal with today's challenges, but also keep a fairer, better tomorrow in sight, looking at how we deliver clean growth, support radical changes in our economy and meet the needs of future communities.
Stantec provides equal employment opportunities to all qualified employees and applicants for future and current employment and prohibit discrimination on the grounds of race, colour, religion, sex, national origin, age, marital status, genetic information, disability, sexual orientation, gender identity or gender expression. We prohibit discrimination in decisions concerning recruitment, hiring, referral, promotion, compensation, fringe benefits, job training, terminations, or any other condition of employment. Stantec is in compliance with laws and regulations and ensures equitable opportunities in all aspects of employment.
For more information on Stantec UK Inclusion & Diversity approach please got to:
Inclusion & Diversity (stantec.com)
**ReqID:** 6319
The transmission and distribution sector is rapidly transforming against a backdrop of growing demand, regulatory changes, ambitious carbon reduction targets and new innovations in technology.
Due to continued growth, we are open to speaking with experienced HV Cable Design Engineers for future opportunities.
We are open to exploring future opportunities in line with our growth across ideally Principal/Senior Engineer levels in our Energy Team. This team presents an exciting opportunity to get involved in a wide variety of projects, across various technical disciplines with clients across country. These projects can include HVDC, interconnectors, windfarms, substations, OHL, geotechnical solutions, building design, protection systems, LVAC, FEED, new builds, refurbishment works, connections schemes etc.
The role is to work as part of the Cable team on electrical substation design, major renewables, HVDC interconnectors, offshore grids, FEED design etc. You will be working closely with our other disciplines and supporting/leading. Ideally you will have experience in working with key T&D clients in the UK.
You will be joining a growing and collaborative team, working in partnership with a variety of clients to develop innovative and sustainable solutions to industry-wide efficiency and environmental challenges. We have ambitious growth plans and as a result there are lots of great development opportunities within our teams. This is an opportunity to play an important part in the U.K. energy transition.
See the below link for more information on our Energy sector teams:
Stantec Energy Transition - UK
**About You**
You will be a pro-active individual with knowledge and understanding of the electricity transmission and distribution industry. You will have the capability to coach and work within the wider energy team.
Ideally you will have a Bachelor's/Masters degree in Electrical Engineering (or related field), from an accredited institution and professional registration as a Chartered Engineer with the Engineering Council and ICE is preferred. You will also have experience as civil substation engineer, with a wider awareness of other typical HV civil engineering projects.
Ideally you will also have the following:-
+ You will have experience in the Design (Concept, FEED, and detail design) of transmission & distribution systems - for Utility companies based on International standards.
+ Ability to carry out inter- disciplinary coordination and work effectively with leads to resolve any design issues.
+ Application of broad practical knowledge to cable design & produces - Cable installation design including cable routing layouts, trench & trenchless section layouts, cable bonding & phasing, cable pulling, termination and jointing arrangements.
+ Hands on experience/working knowledge of CYMCAP software and perform cable sizing calculations based on international standards.
+ Capable of working under challenging workload subject to change at short notice.
+ Proficiency in MS Outlook, and MS Office (Excel, Word and PowerPoint)
+ Proficiency in AutoCAD or MicroStation.
#ukenergy #cbeng
#LI-ET1
**About Stantec**
The Stantec community unites more than 31,000 employees working in over 450 locations across 6 continents. We have been working with our clients and communities in the UK for over 150 years. We plan, design, deliver and manage the development and infrastructure needed to support the creation of sustainable, healthy, and prosperous communities.
Our teams provide effective and relevant solutions, translating our clients' vision into valued consents, deliverable plans for projects and programmes, and efficient designs for delivery, based on technical excellence and deep market insights. We deal with today's challenges, but also keep a fairer, better tomorrow in sight, looking at how we deliver clean growth, support radical changes in our economy and meet the needs of future communities.
Stantec provides equal employment opportunities to all qualified employees and applicants for future and current employment and prohibit discrimination on the grounds of race, colour, religion, sex, national origin, age, marital status, genetic information, disability, sexual orientation, gender identity or gender expression. We prohibit discrimination in decisions concerning recruitment, hiring, referral, promotion, compensation, fringe benefits, job training, terminations, or any other condition of employment. Stantec is in compliance with laws and regulations and ensures equitable opportunities in all aspects of employment.
For more information on Stantec UK Inclusion & Diversity approach please got to:
Inclusion & Diversity (stantec.com)
**ReqID:** 6319
This advertiser has chosen not to accept applicants from your region.
5
Principal/Senior HV Cable Design Engineer - Energy | Expression of Interest
Bristol, South West
Stantec
Posted 17 days ago
Job Viewed
Job Description
Are you an experienced HV Cable Design Engineer looking for exciting new challenges? Enter our talent pool for future opportunities!
The transmission and distribution sector is rapidly transforming against a backdrop of growing demand, regulatory changes, ambitious carbon reduction targets and new innovations in technology.
Due to continued growth, we are open to speaking with experienced HV Cable Design Engineers for future opportunities.
We are open to exploring future opportunities in line with our growth across ideally Principal/Senior Engineer levels in our Energy Team. This team presents an exciting opportunity to get involved in a wide variety of projects, across various technical disciplines with clients across country. These projects can include HVDC, interconnectors, windfarms, substations, OHL, geotechnical solutions, building design, protection systems, LVAC, FEED, new builds, refurbishment works, connections schemes etc.
The role is to work as part of the Cable team on electrical substation design, major renewables, HVDC interconnectors, offshore grids, FEED design etc. You will be working closely with our other disciplines and supporting/leading. Ideally you will have experience in working with key T&D clients in the UK.
You will be joining a growing and collaborative team, working in partnership with a variety of clients to develop innovative and sustainable solutions to industry-wide efficiency and environmental challenges. We have ambitious growth plans and as a result there are lots of great development opportunities within our teams. This is an opportunity to play an important part in the U.K. energy transition.
See the below link for more information on our Energy sector teams:
Stantec Energy Transition - UK
**About You**
You will be a pro-active individual with knowledge and understanding of the electricity transmission and distribution industry. You will have the capability to coach and work within the wider energy team.
Ideally you will have a Bachelor's/Masters degree in Electrical Engineering (or related field), from an accredited institution and professional registration as a Chartered Engineer with the Engineering Council and ICE is preferred. You will also have experience as civil substation engineer, with a wider awareness of other typical HV civil engineering projects.
Ideally you will also have the following:-
+ You will have experience in the Design (Concept, FEED, and detail design) of transmission & distribution systems - for Utility companies based on International standards.
+ Ability to carry out inter- disciplinary coordination and work effectively with leads to resolve any design issues.
+ Application of broad practical knowledge to cable design & produces - Cable installation design including cable routing layouts, trench & trenchless section layouts, cable bonding & phasing, cable pulling, termination and jointing arrangements.
+ Hands on experience/working knowledge of CYMCAP software and perform cable sizing calculations based on international standards.
+ Capable of working under challenging workload subject to change at short notice.
+ Proficiency in MS Outlook, and MS Office (Excel, Word and PowerPoint)
+ Proficiency in AutoCAD or MicroStation.
#ukenergy #cbeng
#LI-ET1
**About Stantec**
The Stantec community unites more than 31,000 employees working in over 450 locations across 6 continents. We have been working with our clients and communities in the UK for over 150 years. We plan, design, deliver and manage the development and infrastructure needed to support the creation of sustainable, healthy, and prosperous communities.
Our teams provide effective and relevant solutions, translating our clients' vision into valued consents, deliverable plans for projects and programmes, and efficient designs for delivery, based on technical excellence and deep market insights. We deal with today's challenges, but also keep a fairer, better tomorrow in sight, looking at how we deliver clean growth, support radical changes in our economy and meet the needs of future communities.
Stantec provides equal employment opportunities to all qualified employees and applicants for future and current employment and prohibit discrimination on the grounds of race, colour, religion, sex, national origin, age, marital status, genetic information, disability, sexual orientation, gender identity or gender expression. We prohibit discrimination in decisions concerning recruitment, hiring, referral, promotion, compensation, fringe benefits, job training, terminations, or any other condition of employment. Stantec is in compliance with laws and regulations and ensures equitable opportunities in all aspects of employment.
For more information on Stantec UK Inclusion & Diversity approach please got to:
Inclusion & Diversity (stantec.com)
**ReqID:** 6319
The transmission and distribution sector is rapidly transforming against a backdrop of growing demand, regulatory changes, ambitious carbon reduction targets and new innovations in technology.
Due to continued growth, we are open to speaking with experienced HV Cable Design Engineers for future opportunities.
We are open to exploring future opportunities in line with our growth across ideally Principal/Senior Engineer levels in our Energy Team. This team presents an exciting opportunity to get involved in a wide variety of projects, across various technical disciplines with clients across country. These projects can include HVDC, interconnectors, windfarms, substations, OHL, geotechnical solutions, building design, protection systems, LVAC, FEED, new builds, refurbishment works, connections schemes etc.
The role is to work as part of the Cable team on electrical substation design, major renewables, HVDC interconnectors, offshore grids, FEED design etc. You will be working closely with our other disciplines and supporting/leading. Ideally you will have experience in working with key T&D clients in the UK.
You will be joining a growing and collaborative team, working in partnership with a variety of clients to develop innovative and sustainable solutions to industry-wide efficiency and environmental challenges. We have ambitious growth plans and as a result there are lots of great development opportunities within our teams. This is an opportunity to play an important part in the U.K. energy transition.
See the below link for more information on our Energy sector teams:
Stantec Energy Transition - UK
**About You**
You will be a pro-active individual with knowledge and understanding of the electricity transmission and distribution industry. You will have the capability to coach and work within the wider energy team.
Ideally you will have a Bachelor's/Masters degree in Electrical Engineering (or related field), from an accredited institution and professional registration as a Chartered Engineer with the Engineering Council and ICE is preferred. You will also have experience as civil substation engineer, with a wider awareness of other typical HV civil engineering projects.
Ideally you will also have the following:-
+ You will have experience in the Design (Concept, FEED, and detail design) of transmission & distribution systems - for Utility companies based on International standards.
+ Ability to carry out inter- disciplinary coordination and work effectively with leads to resolve any design issues.
+ Application of broad practical knowledge to cable design & produces - Cable installation design including cable routing layouts, trench & trenchless section layouts, cable bonding & phasing, cable pulling, termination and jointing arrangements.
+ Hands on experience/working knowledge of CYMCAP software and perform cable sizing calculations based on international standards.
+ Capable of working under challenging workload subject to change at short notice.
+ Proficiency in MS Outlook, and MS Office (Excel, Word and PowerPoint)
+ Proficiency in AutoCAD or MicroStation.
#ukenergy #cbeng
#LI-ET1
**About Stantec**
The Stantec community unites more than 31,000 employees working in over 450 locations across 6 continents. We have been working with our clients and communities in the UK for over 150 years. We plan, design, deliver and manage the development and infrastructure needed to support the creation of sustainable, healthy, and prosperous communities.
Our teams provide effective and relevant solutions, translating our clients' vision into valued consents, deliverable plans for projects and programmes, and efficient designs for delivery, based on technical excellence and deep market insights. We deal with today's challenges, but also keep a fairer, better tomorrow in sight, looking at how we deliver clean growth, support radical changes in our economy and meet the needs of future communities.
Stantec provides equal employment opportunities to all qualified employees and applicants for future and current employment and prohibit discrimination on the grounds of race, colour, religion, sex, national origin, age, marital status, genetic information, disability, sexual orientation, gender identity or gender expression. We prohibit discrimination in decisions concerning recruitment, hiring, referral, promotion, compensation, fringe benefits, job training, terminations, or any other condition of employment. Stantec is in compliance with laws and regulations and ensures equitable opportunities in all aspects of employment.
For more information on Stantec UK Inclusion & Diversity approach please got to:
Inclusion & Diversity (stantec.com)
**ReqID:** 6319
This advertiser has chosen not to accept applicants from your region.
Be The First To Know
About the latest Cable design Jobs in United Kingdom !
6
Principal/Senior HV Cable Design Engineer - Energy | Expression of Interest
Birmingham, West Midlands
Stantec
Posted 17 days ago
Job Viewed
Job Description
Are you an experienced HV Cable Design Engineer looking for exciting new challenges? Enter our talent pool for future opportunities!
The transmission and distribution sector is rapidly transforming against a backdrop of growing demand, regulatory changes, ambitious carbon reduction targets and new innovations in technology.
Due to continued growth, we are open to speaking with experienced HV Cable Design Engineers for future opportunities.
We are open to exploring future opportunities in line with our growth across ideally Principal/Senior Engineer levels in our Energy Team. This team presents an exciting opportunity to get involved in a wide variety of projects, across various technical disciplines with clients across country. These projects can include HVDC, interconnectors, windfarms, substations, OHL, geotechnical solutions, building design, protection systems, LVAC, FEED, new builds, refurbishment works, connections schemes etc.
The role is to work as part of the Cable team on electrical substation design, major renewables, HVDC interconnectors, offshore grids, FEED design etc. You will be working closely with our other disciplines and supporting/leading. Ideally you will have experience in working with key T&D clients in the UK.
You will be joining a growing and collaborative team, working in partnership with a variety of clients to develop innovative and sustainable solutions to industry-wide efficiency and environmental challenges. We have ambitious growth plans and as a result there are lots of great development opportunities within our teams. This is an opportunity to play an important part in the U.K. energy transition.
See the below link for more information on our Energy sector teams:
Stantec Energy Transition - UK
**About You**
You will be a pro-active individual with knowledge and understanding of the electricity transmission and distribution industry. You will have the capability to coach and work within the wider energy team.
Ideally you will have a Bachelor's/Masters degree in Electrical Engineering (or related field), from an accredited institution and professional registration as a Chartered Engineer with the Engineering Council and ICE is preferred. You will also have experience as civil substation engineer, with a wider awareness of other typical HV civil engineering projects.
Ideally you will also have the following:-
+ You will have experience in the Design (Concept, FEED, and detail design) of transmission & distribution systems - for Utility companies based on International standards.
+ Ability to carry out inter- disciplinary coordination and work effectively with leads to resolve any design issues.
+ Application of broad practical knowledge to cable design & produces - Cable installation design including cable routing layouts, trench & trenchless section layouts, cable bonding & phasing, cable pulling, termination and jointing arrangements.
+ Hands on experience/working knowledge of CYMCAP software and perform cable sizing calculations based on international standards.
+ Capable of working under challenging workload subject to change at short notice.
+ Proficiency in MS Outlook, and MS Office (Excel, Word and PowerPoint)
+ Proficiency in AutoCAD or MicroStation.
#ukenergy #cbeng
#LI-ET1
**About Stantec**
The Stantec community unites more than 31,000 employees working in over 450 locations across 6 continents. We have been working with our clients and communities in the UK for over 150 years. We plan, design, deliver and manage the development and infrastructure needed to support the creation of sustainable, healthy, and prosperous communities.
Our teams provide effective and relevant solutions, translating our clients' vision into valued consents, deliverable plans for projects and programmes, and efficient designs for delivery, based on technical excellence and deep market insights. We deal with today's challenges, but also keep a fairer, better tomorrow in sight, looking at how we deliver clean growth, support radical changes in our economy and meet the needs of future communities.
Stantec provides equal employment opportunities to all qualified employees and applicants for future and current employment and prohibit discrimination on the grounds of race, colour, religion, sex, national origin, age, marital status, genetic information, disability, sexual orientation, gender identity or gender expression. We prohibit discrimination in decisions concerning recruitment, hiring, referral, promotion, compensation, fringe benefits, job training, terminations, or any other condition of employment. Stantec is in compliance with laws and regulations and ensures equitable opportunities in all aspects of employment.
For more information on Stantec UK Inclusion & Diversity approach please got to:
Inclusion & Diversity (stantec.com)
**ReqID:** 6319
The transmission and distribution sector is rapidly transforming against a backdrop of growing demand, regulatory changes, ambitious carbon reduction targets and new innovations in technology.
Due to continued growth, we are open to speaking with experienced HV Cable Design Engineers for future opportunities.
We are open to exploring future opportunities in line with our growth across ideally Principal/Senior Engineer levels in our Energy Team. This team presents an exciting opportunity to get involved in a wide variety of projects, across various technical disciplines with clients across country. These projects can include HVDC, interconnectors, windfarms, substations, OHL, geotechnical solutions, building design, protection systems, LVAC, FEED, new builds, refurbishment works, connections schemes etc.
The role is to work as part of the Cable team on electrical substation design, major renewables, HVDC interconnectors, offshore grids, FEED design etc. You will be working closely with our other disciplines and supporting/leading. Ideally you will have experience in working with key T&D clients in the UK.
You will be joining a growing and collaborative team, working in partnership with a variety of clients to develop innovative and sustainable solutions to industry-wide efficiency and environmental challenges. We have ambitious growth plans and as a result there are lots of great development opportunities within our teams. This is an opportunity to play an important part in the U.K. energy transition.
See the below link for more information on our Energy sector teams:
Stantec Energy Transition - UK
**About You**
You will be a pro-active individual with knowledge and understanding of the electricity transmission and distribution industry. You will have the capability to coach and work within the wider energy team.
Ideally you will have a Bachelor's/Masters degree in Electrical Engineering (or related field), from an accredited institution and professional registration as a Chartered Engineer with the Engineering Council and ICE is preferred. You will also have experience as civil substation engineer, with a wider awareness of other typical HV civil engineering projects.
Ideally you will also have the following:-
+ You will have experience in the Design (Concept, FEED, and detail design) of transmission & distribution systems - for Utility companies based on International standards.
+ Ability to carry out inter- disciplinary coordination and work effectively with leads to resolve any design issues.
+ Application of broad practical knowledge to cable design & produces - Cable installation design including cable routing layouts, trench & trenchless section layouts, cable bonding & phasing, cable pulling, termination and jointing arrangements.
+ Hands on experience/working knowledge of CYMCAP software and perform cable sizing calculations based on international standards.
+ Capable of working under challenging workload subject to change at short notice.
+ Proficiency in MS Outlook, and MS Office (Excel, Word and PowerPoint)
+ Proficiency in AutoCAD or MicroStation.
#ukenergy #cbeng
#LI-ET1
**About Stantec**
The Stantec community unites more than 31,000 employees working in over 450 locations across 6 continents. We have been working with our clients and communities in the UK for over 150 years. We plan, design, deliver and manage the development and infrastructure needed to support the creation of sustainable, healthy, and prosperous communities.
Our teams provide effective and relevant solutions, translating our clients' vision into valued consents, deliverable plans for projects and programmes, and efficient designs for delivery, based on technical excellence and deep market insights. We deal with today's challenges, but also keep a fairer, better tomorrow in sight, looking at how we deliver clean growth, support radical changes in our economy and meet the needs of future communities.
Stantec provides equal employment opportunities to all qualified employees and applicants for future and current employment and prohibit discrimination on the grounds of race, colour, religion, sex, national origin, age, marital status, genetic information, disability, sexual orientation, gender identity or gender expression. We prohibit discrimination in decisions concerning recruitment, hiring, referral, promotion, compensation, fringe benefits, job training, terminations, or any other condition of employment. Stantec is in compliance with laws and regulations and ensures equitable opportunities in all aspects of employment.
For more information on Stantec UK Inclusion & Diversity approach please got to:
Inclusion & Diversity (stantec.com)
**ReqID:** 6319
This advertiser has chosen not to accept applicants from your region.
7
Network Design Engineer
Bristol, South West
£474 - £475 Daily
Experis
Posted 2 days ago
Job Viewed
Job Description
Network Design Engineer
12 months
Bristol - 3 days on site 2 days remote
475 per day inside IR35 - Umbrella only
Role overview
Being able to provide consistent data that describes the capability of the Radio Access Network (RAN) is critically important to all our customers. It's so important to get the complex nature of the radio network simplified to explain network status, availability and need for change to both technical and non-technical people, more so than ever before with the need to design and deliver the system feeds reporting for RAN coverage, resilience and change data.
You will be responsible for the design and delivery of the data feeds, automation, analytics and reporting solutions that have a focus on RAN Release and Change Management and ESN tools. You will have a direct impact upon:-
- Solution Design for the exchange of RAN operational and resilience data to support the day to day planning decisions for ESN users .
- RAN Tools enhancements and evolutions, within our partners, to meet ESN requirements.
- Creation and publishing high level OSS solution designs focusing on positive customer experience through pre and post change validation (Consumer and ESN).
What you'll be doing - your accountabilities
- Collaborate closely with RAN OSS design authorities to co-create and deliver solutions that align with the requirements outlined in the ESN contract.
- Develop a strong understanding of change control processes and how OSS designs can support and validate transitions before and after implementation.
- Partner with internal teams to design and deliver seamless data exchange solutions to visualisation platforms - such as coverage portals - that incorporate network resilience and location-based insights.
- Create clear and comprehensive documentation of data flows and solution designs, ensuring they are traceable, auditable, and easy to maintain.
- Ensure all systems introduced are respectful of privacy and security standards, fully adhering to GDPR and internal security policies.
- Provide supportive guidance to a matrix (virtual) team of technical experts, helping them deliver network design solutions and offering thoughtful technical advice to a wider team, including internal colleagues and supplier partners.
The skills you'll need to succeed
- A good understanding of Operational Support Systems and Business Support Systems, especially in Mobile
- Strong understanding of ITIL processes and specifically Change and Release Management
- Expertise in BMC Remedy or similar ticketing software
- Experience with integrating data from external sources into internal platforms, including ETL pipelines and API-based data exchange
- Ability to design scalable, secure, and reliable OSS architectures that support Release and Change Management workflows
- Familiarity with RAN, transmission technologies, and telecom protocols (2G/4G/5G/NB-IoT).
- Proficiency in SQL and database design to support structured data flows and reporting
- Skills in Python, Shell, or similar scripting languages for automation and data manipulation
If you are interested in this role please apply!
This advertiser has chosen not to accept applicants from your region.
8
Network Design Specialist
Bristol, South West
Hays Technology
Posted 3 days ago
Job Viewed
Job Description
Hays are now looking for a Network Design Specialist - OSS Data Integration for one of our local clients
Join a team delivering data-driven solutions to support RAN coverage, resilience, and change management:
Circa 400 - 440 p/d Inside IR35
1-2 days a week onsite
Location is Bristol
Key Responsibilities:
- Design and deliver data feeds, automation, and reporting for RAN change and release management.
- Collaborate with OSS design authorities to meet ESN contract requirements.
- Enhance RAN tools and visualisation platforms with resilience and location-based insights.
- Document data flows and ensure GDPR/security compliance.
- Guide virtual teams and support technical delivery across the business and supplier partners.
Required Experience:
- OSS design with ITIL, Change & Release Management.
- Strong knowledge of RAN, telecom protocols (2G-5G), and resilience planning.
- Proficiency in SQL, Python/Shell, and data integration (ETL/API).
- Familiarity with cloud platforms (AWS, Azure, GCP).
- BPSS clearance (minimum requirement for ESN work).
If you have the above experience in you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or please send a copy of your CV to
Hays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at (url removed)
This advertiser has chosen not to accept applicants from your region.
9