110 Skilled Professionals jobs in Northampton

We are currently looking for vehicle technicians to assist in the following areas of vehicle research and development

• Electrical Testing (including Connected Car)
  
• Body & Trim Testing
  
• NVH
  
• Dyno & Emission Testing
  
• Marketability
  
• General vehicle-based servicing, test preparation and safety checks (Control Room activities)
  
• Inspection & Material Handing (Including Goods In/Out)

• Preparation of vehicles or parts for special uses including Test use.
• Evaluation of vehicle performance according to set criteria.
• Assemble / dis-assemble parts, components, or vehicles for static & dynamic test activities.
• Maintenance of Vehicles to include safety check, retrofit, fault finding and repair.
• Liaise with engineers to conduct tests to Nissan Standards & local operating procedures.
• Instrumentation set-up.
• Write reports.
• Assist with facility management inclusive of maintenance, facility calibration, risk assessment and training.
• Learn bespoke Nissan systems required to fulfil role.

• Vehicle Technician, IMI Level 3 for skilled roles
• Vehicle Technician, IMI Level 2 for semi skilled roles

Construction Labourer & Skilled Labourer
Corby, NN17
10 weeks

Join a Team That Values Hard Work and Reliability.

Were looking for construction labour and/or skilled labour who are reliable, hardworking, and ready to contribute from day one. The ideal candidate is physically fit, safety-minded, and takes pride in doing quality work. No two days are the same, so a positive attitude and a willingness to adapt are key.

What you will be doing:

• Load, unload, and move materials and tools;
• Clean and prepare job sites for work;
• Assist skilled tradespeople;
• Follow safety procedures and site-specific instructions.

What we are looking For:

• Previous experience in construction labour or skilled labour;
• Physically fit and able to lift repeatedly;
• Strong work ethic, reliable, and punctual;
• Safety-conscious with a positive, team-first attitude;
• Valid CSCS card;
• Own PPE inc safety boots, gloves.

Will must be able to provide at least 1 recent work reference.

Construction Labourer & Skilled Labourer
Corby, NN17
10 weeks

Join a Team That Values Hard Work and Reliability.

Were looking for construction labour and/or skilled labour who are reliable, hardworking, and ready to contribute from day one. The ideal candidate is physically fit, safety-minded, and takes pride in doing quality work. No two days are the same, so a positive attitude and a willingness to adapt are key.

What you will be doing:

• Load, unload, and move materials and tools;
• Clean and prepare job sites for work;
• Assist skilled tradespeople;
• Follow safety procedures and site-specific instructions.

What we are looking For:

• Previous experience in construction labour or skilled labour;
• Physically fit and able to lift repeatedly;
• Strong work ethic, reliable, and punctual;
• Safety-conscious with a positive, team-first attitude;
• Valid CSCS card;
• Own PPE inc safety boots, gloves.

Will must be able to provide at least 1 recent work reference.

My client is a world-renowned packaging company and is a leading provider of corrugated packaging within the UK and are seeking an Electrically Biased Maintenance Engineer to work with a strong team of maintenance engineers. As part of the team of you will provide planned and reactive maintenance of production lines and plant equipment.

Maintenance Engineer (Electrical Bias) 

£45,000 - £55,177

Northampton

Shift Pattern – 4 on 4 off – (6AM – 6PM) & (6PM-6AM)

Repeated for 7 sets and this will be followed by 18 days off.

Our client is offering a salary reflecting experience with the potential to earn more through OT, training & development, EAP scheme, onsite mental health and well-being support, 6% private pension.

Responsibilities include

• Be able to read electrical diagrams to re - wire and wire, deal with repair and replace single phase and three phase motors. 
• You will effectively lead and service and repair the machinery equipment & assets.
• You will be required to work on some mechanical issues including pneumatics work,
• You will be able to replace and repair invertors, relays, AC & DC 3 phase motor Drives.
• Commissioning of new machinery, Breakdowns, service & installation
• You will be able to read as well as understand electrical diagrams and schematics, dealing with any electrical circuits, wiring or re wiring.
• Understanding and dealing with the replacement of ethernet cables and dealing with 415vlt machinery.

Essential:

• Strong customer service skills
• Must be comfortable with big machinery.
• Experience of packaging, fmcg, industrial or another manufacturing industry.
• Must be able to understand electrical diagrams, deal with single phase and three phase motors.
• Have a good understanding of invertors, relays, and fault finding
• Some experience or understanding of either pneumatics or hydraulics.
• Strong Electrical background with mechanical experience.
• A related qualification in mechanical engineering or similar
• A HNC, HND, Level 3 or a 1–2-year City & Guilds qualification is also welcome.

If you are interested in applying for this opportunity or wish to receive further information, please contact Sean Turton on (phone number removed) or email a copy of your current CV to (url removed) "SER-IN"

X2 Experienced Fencers Required- Northamptonshire

We need fencers to carry out Housing development fencing in Northamptonshire

The work is extremely long term and will be permanent if all goes well 

7:30am to 4:30pm- Monday to Friday

The pay rate is £16.27 to £17.37 (inc Hol pay) depending on skills and experience and there may also be some slight leeway on that  

Drivers License and CSCS is essential.

Our client is looking to start candidates as soon as possible

Please call PPM on (phone number removed) or submit your CV to apply

((url removed))

 
Position: Multi-Skilled Maintenance Engineer (Electrical Bias)
Location: Commutable from Milton Keynes, Northampton, Luton, Dunstable, Bedford, Wellingborough
Salary: £50,000 - £5,000
Shift Pattern: 4 on 4 off - rotating Days and Nights
Initial shift: Fixed days - 4-day working week with weekends off (until the new site opens)

About the Role
We have an excellent opportunity for a skilled Multi-Skilled Maintenance Engineer with an electrical bias to join a stable and growing manufacturing company. Initially, you will work a 4-day week with weekends off, transitioning to a 4 on 4 off rotating shift once the new site goes live in the New Year. This is a great chance to join a company with strong growth, stability, and real long-term career potential.

Key Responsibilities
·Planned & Reactive Maintenance: Carry out both electrical and mechanical maintenance across a range of production equipment, including ovens, mixers, conveyors, and packaging machinery
·Breakdown Response: React promptly to breakdowns to minimise downtime and maintain production flow
·PPM Activities: Execute scheduled preventive maintenance to ensure equipment reliability and performance
·Technical Involvement: Engage in root cause analysis and continuous improvement; experience with PLCs is a bonus

What We Offer
·Competitive Salary: £50,0 per annum
·Career Development: Join a growing company with internal progression opportunities and long-term potential
·Strong Team Environment: Work within a supportive, forward-thinking engineering department aiming for world-class standards
·Modern Facilities: Be part of a business that is investing in its sites, equipment, and people

Ideal Candidate
·Multi-skilled engineer with an electrical bias
·Background in food manufacturing is beneficial but not essential
·Confident with both planned and reactive maintenance in a fast-paced environment
·Experience with PLCs and continuous improvement initiatives is desirable
·Positive, proactive, and team-oriented mindset

About the Company
You'll be joining a dynamic and expanding manufacturing business with its own retail operation. With continued investment and ambitious plans, this is an exciting time to get involved and grow your career with a company that values its people and promotes from within.

Ready for a Fresh Start?
Apply now to take the next step in your engineering career and join a company where your skills and contributions truly matter

Experienced, multi skilled handyman required for a range of construction duties on the site of a manufacturing facility in Burton Latimer.

8 - 10 hrs a day Monday to Friday.

• Painting
li>Carpet tiles
• Carpentry
• Plastering
• Amongst other general Multi Skill tasks.

Job Opportunity: Multi-Skilled Technicians
Location: Daventry
Salary: £46500
Shift Pattern: 4 on 4 off, Days and Nights

Are you an experienced engineer looking for a dynamic role in a cutting-edge automated distribution environment?

Our client, a leading name in the sector, is seeking multiple Multi-Skilled Technicians to join their team. This is an exciting opportunity to work in a highly automated site, ensuring smooth operations and tackling challenges head-on.

Key Requirements:

• Qualification: Level 3 in Electrical or Mechanical Engineering.
li>Experience: Previous experience in automated distribution or manufacturing is highly desirable.

What’s in it for you?

< i>Competitive salary of £46500 li>Opportunity to work in a state-of-the-art automated facility.
• A supportive team environment with room for growth.

Take your career to the next level! Apply today and be part of a thriving team.

Experienced, multi skilled handyman required for a range of construction duties on the site of a manufacturing facility in Burton Latimer.

8 - 10 hrs a day Monday to Friday.

• Painting
li>Carpet tiles
• Carpentry
• Plastering
• Amongst other general Multi Skill tasks.