930 Electronics jobs in the United Kingdom

Senior Embedded Systems Engineer - Power Electronics

ST1 2BE Staffordshire, West Midlands £60000 Annually WhatJobs

Posted 2 days ago

Job Viewed

Tap Again To Close

Job Description

full-time
Our client, a leading innovator in energy technology solutions, is seeking a highly skilled Senior Embedded Systems Engineer specializing in Power Electronics to join their globally distributed, fully remote team. This role is instrumental in designing, developing, and testing embedded software for advanced power conversion systems. You will play a crucial role in the complete product development lifecycle, from concept to production, contributing to cutting-edge projects that drive efficiency and sustainability. This is a remote-first position, requiring exceptional technical acumen and the ability to work autonomously.

Primary responsibilities include:
  • Designing, implementing, and testing embedded firmware for microcontrollers and microprocessors used in power electronic systems (e.g., inverters, converters, motor controllers).
  • Developing real-time operating systems (RTOS) applications and drivers for various hardware platforms.
  • Writing clean, efficient, and well-documented C/C++ code for embedded systems.
  • Collaborating with hardware engineers to define system requirements and ensure seamless integration of hardware and software.
  • Performing debugging, testing, and performance optimization of embedded software using various tools (e.g., oscilloscopes, logic analyzers, debuggers).
  • Developing and maintaining robust test procedures and validation strategies for embedded firmware.
  • Troubleshooting and resolving complex technical issues in firmware and system integration.
  • Contributing to the design and architecture of new embedded systems and firmware solutions.
  • Staying current with emerging technologies and best practices in embedded systems and power electronics.
  • Mentoring junior engineers and providing technical guidance.

The ideal candidate will hold a Bachelor's or Master's degree in Electrical Engineering, Computer Engineering, or a related discipline. A minimum of 5 years of professional experience in embedded systems development, with a strong focus on power electronics applications, is essential. Proficiency in C and C++ programming for embedded systems is a must. Experience with RTOS, firmware debugging tools, and version control systems (e.g., Git) is required. Familiarity with power electronics topologies, control algorithms, and hardware debugging tools is highly desirable. Excellent problem-solving, analytical, and communication skills are necessary. The ability to work effectively in a fully remote, collaborative team environment, manage priorities, and deliver high-quality results is critical. This role offers a fantastic opportunity to contribute to impactful projects in a leading technology company.
This advertiser has chosen not to accept applicants from your region.

Electronic Systems Designer

Cadillac Formula 1® Team

Posted 6 days ago

Job Viewed

Tap Again To Close

Job Description

Permanent

The Cadillac Formula 1® Team is what happens when history, purpose and daring talent come together. Backed by TWG Global and GM, our team is uniquely positioned to disrupt Formula 1® , bringing a fresh perspective and an unrelenting drive for success. We have the energy of a start-up, with the ideas and originality of a business that always wants to lead, never wants to follow.

We’re building everything from the ground up, from a high-performance car to an inclusive, values-driven culture. We show bold ambition. We combine leadership in innovation with excellence in execution. We are one team. We have the freedom to think differently, the opportunity to shape process and practice, an ego-free environment where people thrive on being challenged by those around them. A historic name behind us. Career-defining moments ahead.

A New Chapter Begins.

Fueled by bold ambition
Play your part in getting us on the grid.

Closing Date: 15th September 2025

We have an opportunity for an Electronic Systems Designer to join The Cadillac Formula 1® Team at Silverstone. In this role you will be responsible for the design of on and off-car electrical and electronic systems. We aspire to be the absolute best in every aspect of our team. Team members are encouraged to challenge established thinking and share their ideas to create an environment where everyone can contribute to our shared success.

  • Design of electrical harnesses and associated components, including definition of harness architecture, circuit topology and power distribution
  • Support electrical installation design such as harness routing and packaging of electronic components
  • Ensure electronic systems and installations fully comply with the FIA technical regulations
  • Generation of technical documentation to support harness manufacture, car assembly, car operation and updates
  • Support development of off-car systems, internal test facilities and rigs
  • Resolution of electronic system faults

Requirements

Driven by high performance
What do you need to bring to the team?

  • Educated to degree level in an engineering subject or equivalent
  • Experience with the specification and design of top-level motorsport wiring harnesses, including proficiency with electrical system design packages, for example Zuken E3 or VeSys Electrical
  • Proficiency in electrical installation design using 3D CAD, ideally using CATIA 3DEXPERIENCE
  • Strong levels of IT skills including MS Office, Word, Excel
  • Experience with the design of low volume prototype analogue and digital electronic circuits, as well as automotive electronic systems and communication protocols
  • Clear and concise communication and ability to plan and manage own workloads
  • Self-motivated, innovative and capable of working generally unsupervised to challenging deadlines

A team like no other.

The Cadillac Formula 1® Team challenges conventions and redefines success through bold ambition, cutting-edge innovation, and an unwavering commitment to precision and excellence—on and off the track. This includes offering industry-leading pension, generous time off and, as part of a global brand, huge potential for career development.


As an equal opportunities employer, we are committed to the equal treatment of all current and prospective employees and does not condone discrimination on the basis of age, disability, sex, sexual orientation, pregnancy or maternity, race or ethnicity, religion or belief, gender identity or marriage and civil partnership. We aspire to have a diverse and inclusive workplace and strongly encourage suitably qualified applicants from a wide range of backgrounds to apply.

At The Cadillac Formula 1 ® Team, all Team Members are expected to actively support and uphold our policies and procedures, including those focused on Environmental responsibility, Sustainability initiatives, Inclusion and Health and Safety practices.

Please note that additional security checks may be required as part of the recruitment process. This may include a background check covering a minimum of the past five years and a criminal record check.

This advertiser has chosen not to accept applicants from your region.

Electronic Systems Engineer

Arondite

Posted 551 days ago

Job Viewed

Tap Again To Close

Job Description

Permanent

About Arondite

Arondite is building the next generation of autonomous systems, software and AI to solve the world's most important frontier problems across defence, critical industries and the humanitarian sector. We are looking for mission-driven engineers who want to be part of a highly motivated team and build things that make a positive difference.

The Role

We are looking for talented and flexible electronic systems engineers to take ownership of electrical and electronic elements from initial concept through to mass production. You will work closely with mechanical, software and AI engineers to build fully integrated products. Products will typically require the flexibility to integrate off the shelf parts seamlessly with bespoke circuit board designs.

You will engage in the full life cycle, from sourcing of components through to liaising with suppliers to create prototypes and setting up volume manufacturing. You will also support customers to analyse any failures and continuously identify areas for improvement.

As an early hire in a new startup, you will have the opportunity to set up and drive the electronics design within the company as we continue to expand and build a broader range of products. Regardless of experience level, you will review the output of other engineers and provide feedback - everyone’s input is valued.

Requirements

You should apply if you have:

  • MSc or MEng in a technical or engineering subject
  • Experience using a major ECAD tool, ideally Altium Designer, to create multi-layer printed circuit boards
  • Solid grasp of the physics behind electronic design principles
  • Experience of integrating electronics with software and mechanical designs to build complete systems
  • Hands-on lab skills with instruments such as oscilloscopes, spectrum analysers, signal generators for testing and debug
  • Practical abilities to make and modify electrical and electronic circuits
  • Programming skills in C and/or Python

Note: The above describes the perfect candidate. Please don’t be deterred: we encourage you to apply even if you only partially fulfil this list!

Nice to have:

  • Experience in RF engineering and antenna design
  • Knowledge of safety design and electromagnetic compatibility requirements for European CE Marking

All engineers at Arondite are expected to:

  • Communicate effectively within a multi-disciplinary team of hardware, software and AI engineers
  • Be resourceful and open-minded in seeking solutions to engineering challenges
  • Teach themselves to be the expert, if we don’t already have one in a particular area

Please note: This is an in-person position based in London. The successful candidate must by the start of their employment have permission to work in the UK.

Benefits

We offer:

  • The opportunity to work with world-class engineers on a wide range of technologies
  • Free training and education to quickly fill knowledge gaps
  • The best resources and equipment required to do your job
  • Exposure to working closely with customers on real problems
  • Free meals and snacks in the office
  • 7% employer pension contribution
  • Employee Stock Options for everyone, so we all have a stake in the company’s growth
  • Relocation support
This advertiser has chosen not to accept applicants from your region.

Electronics Engineer

S40 Ashgate, East Midlands KO2 Embedded Recruitment Solutions Ltd

Posted today

Job Viewed

Tap Again To Close

Job Description

full time

Position: Electronic Engineer

Location: Chesterfield Area + Flexible Hybrid Work from Home

Salary: Up to 50,000

About the Role:

An exciting opportunity has opened for an Electronic Engineer to join a growing, multidisciplinary engineering team working on cutting-edge bespoke projects. Our client specialises in the design and manufacture of complex electronic solutions, combining custom-designed interfaces with off-the-shelf components.

As an Electronic Engineer, you'll play a hands-on role across the full product development lifecycle-from concept and circuit design to PCB layout, testing, and fault finding. You'll collaborate closely with like-minded engineers and report directly to the Design Manager.

Key Responsibilities:

  • Design and layout of multilayer PCBs
  • Digital and analogue circuit design
  • Creation of schematic diagrams
  • Electronics testing and fault diagnosis
  • Designing for manufacture

Desirable Skills & Experience:

  • Experience with Altium Designer
  • Microcontroller development (ARM, PIC, TI, etc.)
  • Background in test equipment, automation, or control systems design

Why Join?

  • Work on a wide variety of innovative projects
  • Be involved in the full design lifecycle
  • Join a supportive and experienced engineering team
  • Flexible hybrid working model
  • Office located between Chesterfield and Sheffield - easily commutable from Nottingham, Mansfield, Barnsley, Worksop, and surrounding areas

Apply Today:

To apply for this fantastic opportunity, please submit an up-to-date CV or contact Laurence Powell or Andrew Knight at KO2 Embedded Recruitment Solutions for more information.

This advertiser has chosen not to accept applicants from your region.

Electronics Engineer

Edinburgh, Scotland RC Fornax

Posted today

Job Viewed

Tap Again To Close

Job Description

contract

Electronics Engineer – Inside IR35

Location : Hybrid from Edinburgh 

RC Fornax is seeking an Electronics Engineer to join our prime defence customer. This role offers the opportunity to work on innovative projects requiring expertise across both digital and analogue domains.

Key Responsibilities:

  • Capture requirements, create schematics, and perform PCB layout using Dx Designer and Expedition (Siemens EDA).
  • li>Conduct circuit simulations and lead design reviews in collaboration with engineering and manufacturing teams.
  • Develop and execute design verification tests and produce documentation to support the transition of designs into production.

What You’ll Bring:

Skills, Qualifications & Knowledge:

    < i>A degree (BSc, BEng, MEng, MSc, PhD, EngD) in Electronic Engineering or a related field such as Physics, ideally with a focus on electronic techniques.
  • Strong experience with PCB development tools and processes, preferably Siemens EDA.
  • Expertise in one or more of the following areas:
  • High-speed digital circuit design (e.g., LVDS, JESD204, Ethernet).
  • FPGA and processor circuit design, including DDR memory and peripheral circuits.
  • Analogue design for low-noise signal conditioning, ADCs, and DACs.
  • Power supply design with emphasis on low noise, low power, and compact form factors.
  • Proficiency in circuit simulation and PCB signal/power integrity analysis.
  • Familiarity with DFx principles (cost, testability, manufacturability).
  • Experience in system and sub-system integration and debugging.
  • Knowledge of Matlab and Simulink is a plus.
  • Ability to design solutions that meet quality, safety, reliability, and testability standards.
  • Capable of presenting engineering solutions in design and peer reviews.
  • Able to manage project tasks with clear deliverables, timelines, and cost constraints.
  • Self-sufficient and proactive in completing tasks.
  • Willingness to mentor and support junior team members to enhance team capability.
This advertiser has chosen not to accept applicants from your region.

Electronics Engineer

Tyldesley, North West Morson Talent

Posted today

Job Viewed

Tap Again To Close

Job Description

contract

12 Month Contract – Inside IR35 – Onsite in Bolton

Up to £40 per hour umbrella

Job Role:

We are seeking an Electronics Engineer to join our Calibration & Maintenance Team, to service Electrical and Electronic Test Equipment, including Special to Type Test Equipment (STTE . These tasks include fault finding and repair of test equipment, supporting routine calibrations, commissioning of Test Equipment and drift analysis.

You will be working within an experienced team of Calibration & Maintenance Engineers supporting complex test platforms in the manufacture and test of complex missile systems. You will be trained to calibrate and support special to type factory test equipment using a range of technologies, DC to Microwave.

Key Skills and Experience:

  • Minimum qualification: HNC/HND in Electrical & Electronics Engineering.
  • Experience and knowledge in the calibration of test equipment and maintenance of test systems to component level.
  • Able to utilise instructions, handbooks, drawings or specifications to provide technical advice/guidance. Able to use this information to conduct appropriate measurements and repairs down to component level.
  • Good understanding of calibration principles and processes.
  • Able to mentor other or more junior staff when requested by line manager.
  • Able to deal with multiple issues, tasks and priorities concurrently.
  • Analytical and problem solving skills.
  • Good communication skills with the ability to tailor communication to the relevant audience.
  • A good understanding of SAP would be desirable.
  • Experience of working on Environmental Chambers an advantage.

Qualifications:

  • Minimum qualification: HNC/HND in Electrical & Electronics Engineering.
This advertiser has chosen not to accept applicants from your region.

Electronics Engineer

BL1 Bolton, North West Line Up Aviation

Posted today

Job Viewed

Tap Again To Close

Job Description

contract

On behalf of our client, we are looking for a Electronics Engineer to join them on an initial 12-month basis. As Electronics Engineer You will be working within an experienced team of Calibration & Maintenance Engineers supporting complex test platforms in the manufacture and test of complex missile systems. You will be trained to calibrate and support special to type factory test equipment using a range of technologies, DC to Microwave


Role : Electronics Engineer
Pay : 40 via Umbrella
Location : Bolton
Contract : 12 months (possible extension)
IR35 Status : Inside
Security Clearance : SC Clearence needed to start, UK Eyes only

Skillset/experience required:

  • Minimum qualification: HNC/HND in Electrical & Electronics Engineering.
  • Experience and knowledge in the calibration of test equipment and maintenance of test systems to component level.
  • Able to utilise instructions, handbooks, drawings or specifications to provide technical advice/guidance. Able to use this information to conduct appropriate measurements and repairs down to component level.
  • Good understanding of calibration principles and processes.
  • Able to mentor other or more junior staff when requested by line manager.
  • Able to deal with multiple issues, tasks and priorities concurrently.
  • Analytical and problem solving skills.
  • Good communication skills with the ability to tailor communication to the relevant audience.
  • A good understanding of SAP would be desirable.
  • Experience of working on Environmental Chambers an advantage.


If you are interested in applying for this position and you meet the requirements, please send your updated CV to: Natalie Dalkin at Line Up Aviation

Line Up Aviation has carved its own place in the recruitment of Aviation and Aerospace personnel all over the world for more than 30 years. We work with some of the industry's best known companies who demand the highest standard of applicants.

"Follow @LineUpAviation on Twitter for all of our latest vacancies, news and pictures from our busy UK Head Office. Interact with us using the #LineUpAviation tag at anytime! Thank you for your follow!"

This advertiser has chosen not to accept applicants from your region.
Be The First To Know

About the latest Electronics Jobs in United Kingdom !

Electronics Assembler

Southcote, South East Gi Group

Posted 1 day ago

Job Viewed

Tap Again To Close

Job Description

temporary

Are you an experienced Electronics Assembler looking for your next opportunity? Join a dynamic and growing team in Reading where your skills will be valued and developed.

Location: Reading
Pay Rate: 13.50 per hour
Contract: Temp to Perm

Hours:

Monday to Thursday: 7:30am - 4:00pm
Friday: 7:30am - 1:30pm


Key Responsibilities:

- Operate and maintain pick and place machines
- Program and set up surface mount equipment
- Apply components onto PCB boards with precision
- Perform crimping and wiring tasks
- Soldering

Requirements:

- Previous experience in an a electronics assembly position
- Strong attention to detail and ability to work independently
- Familiarity with PCB assembly processes
- Knowledge on Surface Mount process

This is a fantastic opportunity to secure a long-term role with the potential to go permanent. If you're ready to take the next step in your career, we'd love to hear from you!








Should you require any support or assistance, please contact your local Gi Group office.

Gi Group Holdings Recruitment Limited are proud founding members of Menopause in business, pledge members for Neurodiversity in business, Disability committed members, Silver status pledge members for the Armed Forces Covenant, and Bronze trail blazers for Racial Equality matters.

Gi Group Holdings Recruitment Limited group of companies includes Gi Recruitment Limited, Draefern Limited, Gi Group Recruitment Ltd, INTOO (UK) Limited, Marks Sattin (UK) Limited, TACK TMI UK Limited, Grafton Professional Staffing Limited, Encore Personnel Services, Gi Group Ireland Limited and Kelly Services (UK) Ltd. Gi Group Ireland Limited are acting as an Employment Agency in relation to this role.

We are committed to protecting the privacy of all our candidates and clients. If you choose to apply, your information will be processed in accordance with the Gi Group Privacy Statement. To view a copy and to help you understand how we collect, use and process your personal data please visit the Privacy page on our Gi Group website.

This advertiser has chosen not to accept applicants from your region.

Electronics Technician

Jarrow, North East KO2 Embedded Recruitment Solutions Ltd

Posted 1 day ago

Job Viewed

Tap Again To Close

Job Description

full time

Electronics Technician
Location: Jarrow, Tyne & Wear
Salary: 35,000 - 40,000

KO2's client, a growing engineering business based in Jarrow, is looking for an Electronics Technician to join their team. This is a hands-on role for someone who loves fixing, testing, building, and solving technical problems.

The company is open-minded: you might be a hobbyist who spends weekends building and repairing electronics, or you could be a highly experienced technician with years in the trade. What matters most is a can-do attitude, a willingness to learn, and a genuine enthusiasm for electronics and electrical work.

This is a varied role - no two days are the same. One day you might be fault-finding down to component level on a PCB, the next updating a schematic, writing a manual, installing a system onsite, or unpacking equipment ready for a customer. If you like rolling your sleeves up, getting stuck in, and turning your hand to anything, this is the job for you.

Key Responsibilities

  • Fault-finding and repair on PCBs, ideally down to component level.
  • Soldering, repair, and assembly work.
  • Updating drawings, tweaking schematics, and supporting engineers.
  • Writing manuals, reports, and technical documentation.
  • Onsite and offsite support, including customer visits, servicing, and installations.
  • Assisting with new product builds, repairs, and system integrations.
  • General hands-on support wherever needed across the business.

Skills & Experience

Essential:

  • Strong interest and background in electronics/electrical.
  • PCB fault-finding and repair experience.
  • Confident soldering skills.
  • "Can-do" attitude with a love of technical challenges.
  • Comfortable working hands-on across a wide range of tasks.

Highly Desirable:

  • Repair down to component level.
  • Technical writing (manuals, documentation).
  • Customer-facing service or installation experience.

The client is open to considering:

  • Experienced Electronics Technicians or Test Engineers.
  • Skilled graduates with practical project work.
  • Hobbyists with strong hands-on electronics knowledge.

Why Join?

  • Salary of 35,000 - 40,000, depending on experience.
  • Huge variety in day-to-day tasks - from bench repair to customer site installs.
  • Chance to learn and develop across electronics, electrical, testing, and servicing.
  • Work with a supportive team on both in-house products and customer projects.
This advertiser has chosen not to accept applicants from your region.

Electronics Engineer

DE75 Heanor, East Midlands Talk Staff Group Limited

Posted 2 days ago

Job Viewed

Tap Again To Close

Job Description

full time

We are looking for an enthusiastic R&D Electronics Engineer who craves technical challenges and has an interest in technology, electronics and a passion for cars.

The successful R&D Electronics Engineer will be responsible for helping develop remanufacturing solutions for complex automotive electronic /mechatronic control modules. This is a great opportunity to develop your technical skills in a constantly evolving industry. 

To be considered for the role as the Electronics Engineer, you’ll require the following essentials:

  • Interests and experience in mathematics of circuit analysis.
  • Experience in electronic fault finding to component level and PCB rework methods.
  • Well organised with a methodical approach to problem solving.
  • Team player with excellent attention to detail.
  • Knowledge and experience of automotive operations, wiring diagrams, electronics, and communication protocols. 
  • Knowledge and experience using lean process methodologies.

Within the position of Electronics Engineer, you’ll also be:

  • Test electronic circuits by simulating vehicle loads and signals
  • Reverse engineer electronic circuits to find root causes of failures
  • Enact rebuild solutions for electronic hardware and software failures
  • Create technical documentation

Benefits of the Electronics Engineer

  • 32 days holiday per year, inclusive of
This advertiser has chosen not to accept applicants from your region.
 

Nearby Locations

Other Jobs Near Me

Industry

  1. request_quote Accounting
  2. work Administrative
  3. eco Agriculture Forestry
  4. smart_toy AI & Emerging Technologies
  5. school Apprenticeships & Trainee
  6. apartment Architecture
  7. palette Arts & Entertainment
  8. directions_car Automotive
  9. flight_takeoff Aviation
  10. account_balance Banking & Finance
  11. local_florist Beauty & Wellness
  12. restaurant Catering
  13. volunteer_activism Charity & Voluntary
  14. science Chemical Engineering
  15. child_friendly Childcare
  16. foundation Civil Engineering
  17. clean_hands Cleaning & Sanitation
  18. diversity_3 Community & Social Care
  19. construction Construction
  20. brush Creative & Digital
  21. currency_bitcoin Crypto & Blockchain
  22. support_agent Customer Service & Helpdesk
  23. medical_services Dental
  24. medical_services Driving & Transport
  25. medical_services E Commerce & Social Media
  26. school Education & Teaching
  27. electrical_services Electrical Engineering
  28. bolt Energy
  29. local_mall Fmcg
  30. gavel Government & Non Profit
  31. emoji_events Graduate
  32. health_and_safety Healthcare
  33. beach_access Hospitality & Tourism
  34. groups Human Resources
  35. precision_manufacturing Industrial Engineering
  36. security Information Security
  37. handyman Installation & Maintenance
  38. policy Insurance
  39. code IT & Software
  40. gavel Legal
  41. sports_soccer Leisure & Sports
  42. inventory_2 Logistics & Warehousing
  43. supervisor_account Management
  44. supervisor_account Management Consultancy
  45. supervisor_account Manufacturing & Production
  46. campaign Marketing
  47. build Mechanical Engineering
  48. perm_media Media & PR
  49. local_hospital Medical
  50. local_hospital Military & Public Safety
  51. local_hospital Mining
  52. medical_services Nursing
  53. local_gas_station Oil & Gas
  54. biotech Pharmaceutical
  55. checklist_rtl Project Management
  56. shopping_bag Purchasing
  57. home_work Real Estate
  58. person_search Recruitment Consultancy
  59. store Retail
  60. point_of_sale Sales
  61. science Scientific Research & Development
  62. wifi Telecoms
  63. psychology Therapy
  64. pets Veterinary
View All Electronics Jobs